To begin with, yes, I'm interested in trades. I love classic 'cockers, other mechs such as mags and PPS semis, pumps of all flavors and AKA electros. I don't need any more non-AKA electros, hoppers, barrels, air tanks, or soft goods, thanks. With that said, here we go...
1) Species Intimidator
This gun is very minty - 9.99/10 condition. Has been 2k5'd, Infamous board inside, newer style reg, clamping feed, barrel, etc., on the outside. Adjustable ram cap. Aftermarket ano - don't know who performed the work, but it's very sharp. The only blem on this marker is that the matching Bob Long Gear Drive ASA is sticky and harder to turn than it should be - I haven't torn it down to investigate. $SOLD
2) Rainman "BFG" Rainmaker
What we have here is a very custom Rainman Rainmaker. It sports an Angel frame housing a Thunderboard LCD board that uses a single reflective ACE (but currently needs a new one), a custom frame/MAC/ASA mount, custom backblock that holds a 9v battery, PPS Stabilizer, Twister LPR, Angel-threaded feed post and Kapp high rise, 'cocker detent, Titanium bolt link, maddman valve, Mad Marty mods, an RC strut spring on the carrier that is claimed to increase cycle speed by 2bps, lots of custom milling, anodizing, etc. etc. etc. Lots of work went into this gun - I can't even imagine the original build cost of the thing. Original matching massive Kapp drop is included, though not pictured. For what it's worth, the drop has some pitting in the ano. Pictured Dye SS barrel not included - a stock Rainmaker barrel (Infinity clone) will come with the marker. I haven't gassed up the marker since receiving it. It looks to need just a little work/tuning. In addition to needing a new eye (though it will work w/o one), the on/off switch below the frame seems to be shot (damage from shipping, maybe?) and likely needs replaced, as it feels very wiggly and the gun isn't turning on. The feedneck post was a touch loose in the body when I received the gun, so I put a dab of green loctite on it and reinstalled - it should be good to go, and it's Angel-threaded, so feel free to swap out the Kapp high rise for your clamping feed of choice. $275 shipped.
3) '96 Desert Fox
Shows a little wear and tear, but is in good shape. Haven't chronoed it, but it airs up and shoots just fine. $SOLD
4) Medusa-framed Automag
Freshly-assembled from spare bits I had laying around. Pretty darn clean. Level 7 inside. Looking for $150 shipped.
5) Air Power Apex Elite
These are fantastic little guns, but I have a pile of pumps in my collection and am just never going to get around to using this one. This Apex has some wear around the edges, chipped paint on the frame and minimal oxidation on the steel parts, but is in pretty good shape for being 23+ years old. Have aired it up but not put any paint through it. $105 shipped.
6) Lapco Spectre.
Great overall condition. Has a couple mis-matched bits. Gray-anodized Wintec style pump handle and plated pump arms, which have a bit of flaking. Taso high rise rail. Adjustable Lapco bolt, fluted hammer. Super sweet pump stroke. Holds air and dry fires great, should be good to go. $SOLD
7) WALZ "Kit Carson"
This gun is absolutely friggin' sweet and loaded with custom fabricated WALZ goodness: SS .680 barrel, custom bolt, pump handle, loudener, 2 different feed tubes (raw brass one shown below plus the black powdercoated one in WALZ's pics), etc., and the powder coating is gorgeous. I added the CCI 12g changer, but this would also rock with a 3.5oz or 13ci bottle. Here are a couple threads on the gun: one
I'm looking for $585 - plus shipping - for this guy.