Find fields & stores near you!
Find fields and stores
Zipcode
PbNation News
PbNation News
Community Focus
Community Focus

Reply
 
Thread Tools
Old 04-24-2013, 02:12 PM #1
tranceformer110
 
 
Join Date: Apr 2013
Cyclone feed on a Carver One retrofit

So I recently bought the Carver One marker and understood going in that the Cyclone feed system is not a bolt on system for this marker. However, I've read on the internet of folks who successfully retrofitted it to this marker. Me being a bit of a "tinker'er" and wanting the low profile 30-40 round hoppers for the cyclone, I couldn't leave well enough alone so I've bought the adapter bracket for a 98. Has anyone here done the retrofit and have any insight before my stuff arrives?
tranceformer110 is offline   Reply With Quote
Old Sponsored Links Remove Advertisement
Advertisement
Old 04-30-2013, 10:57 AM #2
2nwyka
A Lover and a Poet
 
2nwyka's Avatar
 
Join Date: Aug 2011
Location: Fort Collins, Colorado
2nwyka posts videos on PbNation
2nwyka has achieved Level 3 in PbNation Pursuit
I haven't done this particular modification, however through tinkering with other markers, be really darn sure before you drill anything becauset it's hard to fill holes back up. Don't do anything hasty or quick! Take your time and you'll be fine.
I'd look at the Cyclone system on other markers and see how you can do it yourself.
Noah
__________________
Learn more about paintball! Articles Videos!!

CSU Rams Paintball

Rocking drop-forwards like they're going out of style...oh, wait...
Proud Pumper since 2011
2nwyka is offline   Reply With Quote
Old 04-30-2013, 03:20 PM #3
tranceformer110
 
 
Join Date: Apr 2013
I'm making sure I do my modifications to the plastic bracket from the feeder and not the gun(if I can help it at all). There will be some gaps to fill in and then there's the issue of keeping it secure to the gun.
tranceformer110 is offline   Reply With Quote
Old 05-04-2013, 08:41 PM #4
DoomCookie
 
 
Join Date: Mar 2013
you can probably fit a rip clip on it with some mod.. 49$ on ansgear
DoomCookie is offline   Reply With Quote
Old 05-15-2013, 03:23 PM #5
tranceformer110
 
 
Join Date: Apr 2013
meh I gave up. I was going to have to glue the bracket to the gun and I didn't feel it would be very secure that way. I just but a small 50rd tac hopper instead.
tranceformer110 is offline   Reply With Quote
Reply


Thread Tools

Posting Rules
Forum Jump