Originally posted by Warriorlax1
i brought a dye xcel barrel for my tes it is spyder threads and it goes in half way and some of the threads are sticking out with the barrel like that with pbs break in it or will it work like its in all the way
To see if it matches up to your bore, try this:
1.) Remove your bolt, completely.
2.) Shine a small flashlight into the bore ( one you can hold in your mouth since you need both hands, or have dad hold it for you)
3.) As you unscrew your stock barrel, watch to see where the barrel meets the bore.
4.) Screw in your barrel, if it doesnt meet the bore like the origional barrel your screwed.
5.) If it looks like it matches up, put the bolt back in, air it up and drop a few paintballs in and fire it, if they break in the area where the barrel meets the bore, your barrel is screwed due to the seam or space between the bore and barrel.