Invert Mini doesn't respond to trigger pull. PLEASE HELP!!
I have a Invert Mini V3. Everything is stock except I have a Lurker Bolt put in, I've checked for all of the magnets and they are all there. I know my eyes don't work so I have purchased the Virtue Laser Eyes and they are going to be here tomorrow. I have played a few games with the eyes off back when I could turn them off. Currently I can start it up but the "broken" eyes are always turned "on". I don't think it is registering the trigger pulls because the noid doesn't click either. I'm not sure if my eye board is completely dead or my noid is dead? Or maybe both?
Last edited by Jinxman23 : 03-14-2013 at 04:27 PM.
Get the new eyes installed and diagnose it from there...process of elimination.
however, with eyes ON or OFF, the LED should change color with every trigger pull, an indication the board is registering a trigger pull. If it doesn't, you may have board issues. But if you're sure the magnet is present and installed correctly, adjust the magnet screw all the way in, then back it out, checking for a registered pull trigger every half turn or so. If your eyes are OFF during this process, you'll hear the noid click when you're within adjustment. Fine tune it from there.
Again, install the new eyes first, so you know you've eliminated that as an issue.
Furthermore, turn the gun on, and stick your finger into the breach... the led ON THE BOARD should change color to register a ball present. DO NOT HAVE THE GUN AIRED UP WHEN YOU DO THIS PLEASE... you accidentally pull the trigger with your finger in there, you're gonna have some choice words to yell, if she decides to fire. If with the new eyes installed, you cant get an LED change, look to the main board for issues.
No it doesn't work with my finger in the chamber... I got the new eyes today. I'm not sure if they are bad or not. One eye lights up and the other doesn't. But it senses that there is a ball in the chamber when I put my finger in it so I do believe that the eyes are functioning properly. However with/without my finger in the breach there is no click from the noid. I tried turning the eyes off but I can't because something is not responding to the trigger. I know a guy who also has a mini. I'll have him see if my noid works in his gun. I adjusted the magnets in the trigger and that did nothing. The magnet in the trigger should be attrcated to the magnet in the upper housing of the gun correct?