Time for one of my projects to go to someone else. It's a 2006 Viewloader Triton II, one of the best little guns I've used. Now, it's been modified pretty extensively and it's shooting extremely consistently. My last string was 281, 279, 280, 283. It's a pretty sick little gun. I'll include a 9" PMI chrome barrel that matches it. The most obvious modification is the milling on the back. I've taken off the excess metal on the top of the body with a vertical mill at school, then polished it all up nicely. It was done professionally, so everything looks good and is all the same dimensions. I've put a new spring in it for consistency and modified the foregrip with a little more aggressive grip. All new detents and detent covers. Known damage is a little chip on the back tube that I can mill out and polish, and a little wear on the inside of the bolt tray. It'll be clean (unlike the pictures...she has forty-ish cases in her and a lot of continuous use by lenders as well as myself) and lubed when I ship. On to the pictures!
I'm asking $50 or a 2k+ AutoCocker pump kit of any kind.
Post, then PM