[-Lightning-]

So I was messing around with my dm13, and when I went to unscrew the lpr, it was all the way tight, but the gun shoots fine. When I'd loosen it, it gets really loose to where its really easy to screw/unscrew with my fingers. Is this normal?

[grss429]

I'm a little confused, you mean your brass LPR adjuster try to explain a bit


If you're talking about your brass adjuster for your LPR, no it shouldn't be that lose, you shouldnt be able to even get your fingers in there.. it has a back cap on it

[-Lightning-]

Ok it was the back cap that I loosened. With the brass peice, when I turn it all the way in to tune it, do I go all the way, or until it becomes a little stiff. I don't want to force it. (No homo)

[grss429]

Yah the back cap can be finger tight, the LPR adjuster is a totally different allen key size.. You dont normally mess with it unless you're taking lpr out (every 60k shots)

for your dm13, set your dwell to 21 and turn your LPR brass adjuster till it'
s stiff, basically that's when the piston hits the LPR seat, then do 3 1/2 COMPLETE 360 degree turns. and u'll be good to go

[-Lightning-]

Ok thanks! I was just unsure. My first gun with am lpr

[grss429]

Originally Posted by -Lightning-

Ok thanks! I was just unsure. My first gun with am lpr

No problem glad you asked rather then just taking apart!