[Pa1nt8aller84]

I have a dm 12. The tank is good. Screwed in. The asa won't pressurize the gun. I can't completely close the knob to the tank and it won't open the tank/needle and air up the gun. Any suggestions???

[Pa1nt8aller84]

Please help me out here.

[Mason74]

Originally Posted by Pa1nt8aller84

Please help me out here.

Have u tried another ASA on it?

[Pa1nt8aller84]

No. Unless I buy one.

[-Lightning-]

Is your tank empty? Lol but try taking the macroline off, and turning the Asa on. If air doesn't rush out of the end then it's the Asa. Trust me, it's safe to do. But don't be scared it will be loud.

[Pa1nt8aller84]

Already did that. Idk if its the needle or the on /off its self. You try opening it to let the air threw and it doesn't open all the way then it starts to close itself.

[Mason74]

Originally Posted by Pa1nt8aller84

Already did that. Idk if its the needle or the on /off its self. You try opening it to let the air threw and it doesn't open all the way then it starts to close itself.

U have the dye UL airport ASA, right? Not being smart *** here, just making sure.

If so, can u turn the on/off into position all the way without a tank in the gun, and does the pin come out? If it does, and u put pressure on it, does the pin go back in? Does the pin come out all the way?

[Pa1nt8aller84]

Problem solved and fixed. Thanks alot

[Ravenstylea2]

Will the Bob Long Cam Drive ASA fit into the DM's? I would rather have it than the NT style. Had many issues with that ASA. Gun's phenomenal though.

[DarkRipper]

It should fit, you might have to put on a mini rail though.

I learned how to take apart and replace orings/lube my Airport after my marker was anodized.

There's some tiny little bits in there but once you get the concept it's easy to fix.
I prefer it to the front twist style ASAs and MUCH prefer it to the POPS style just for size reasons.