[Paper_Cut]

Originally Posted by Apollo918

My ripper 1 was running around 50-55psi.

I'm sorry to doubt you, but I really have to see this to believe it. How did you manage to make a gun that cycles at 85psi and shoots at 200 and get it shoot at 55psi?

[p8ntballr68059]

for the same reason my marq is shooting at 285 my lpr set to 60

[Box]

Originally Posted by p8ntballr68059

he is talking about it working on a shego...as for the ion if you put just a small amount into them like a feedneck, cheap board, and a bolt

Right, and then you would have a solid gun in the Ion. You do that to a crossover, and I don't think you'd be happy with it. I feel that the Ion, while not much, is superior to the crossover and a better platform.

The ego 10 noid would certainly need a custom manifold to work, are they shorter than parker style noids?

[Paper_Cut]

Originally Posted by p8ntballr68059

for the same reason my marq is shooting at 285 my lpr set to 60

Oh, he is talking about the LPR? I thought he had the HPR at 50-55psi

[p8ntballr68059]

no the hpr will never be that low but a well tuned timmy could be down to like 150 psi

[inmylife2415]

I know I asked already but does anyone have a ccm frame 45* or 68* and also looking for a ST bomb 3way

[tyronejk]

I should've been more specific. What the lowest HPR setting that a gun can run at?

[p8ntballr68059]

Originally Posted by inmylife2415

I know I asked already but does anyone have a ccm frame 45* or 68* and also looking for a ST bomb 3way

idk about the ccm frame but you should look on the site that starts with a M for your st bomb 3 way

Originally Posted by tyronejk

I should've been more specific. What the lowest HPR setting that a gun can run at?

most of us figured it out already lol

[Apollo918]

Originally Posted by p8ntballr68059

no the hpr will never be that low but a well tuned timmy could be down to like 150 psi

I had my shocker shooting great at about 115. It just wasn't very efficient.

[tyronejk]

Originally Posted by p8ntballr68059

idk about the ccm frame but you should look on the site that starts with a M for your st bomb 3 way


most of us figured it out already lol

Haha yeah, just in case one of those slow guys comes in here

[p8ntballr68059]

i am sure the vice could go down that low but the recharge would suffer so would the efficiency

[Paper_Cut]

Originally Posted by tyronejk

I should've been more specific. What the lowest HPR setting that a gun can run at?

Keep in mind low HPR doesn't necessarily mean low kick or good/bad efficiency. Shocker shoots as smooth as butter at 200psi.

[inmylife2415]

Originally Posted by Apollo918

Well just so everyone knows... Etek solenoids don't mount to the shocker manifolds at all.

sell it
http://www.pbnation.com/showthread.php?t=3945846

[p8ntballr68059]

or make it work.. i have a marq noid or 2 you could probably make work

[Apollo918]

They are the same size as standard Parker noids.

[L8r_H8r]

Yeah you'll need to heavily modify the manifold from the Etek to work on an SFT body or have one made.

[inmylife2415]

Originally Posted by L8r_H8r

Yeah you'll need to heavily modify the manifold from the Etek to work on an SFT body or have one made.

I've been saying this for a while, cs could make a manifold for you with little time and effort

[Apollo918]

And that's why I am waiting on Cs to get back from dinner with Trent lol

[smartballer91]

Hi!

[inmylife2415]

Originally Posted by Apollo918

And that's why I am waiting on Cs to get back from dinner with Trent lol

Would be cool to sit down with that man...and Trent

Originally Posted by smartballer91

Hi!

Hello el president

[smartballer91]

How's it going man?