[xXhunter47Xx]

Like a shego, but with an Extcy instead of a Shocker.

So it's an Ego Framed Extcy, which gives you OLED capabilities as well as the comfort of a PL frame. Probably a star-frame, because those can be somewhat easily grabbed.

I'd assume you'd need the 360 QEV for the Extcy first so you can add the starframe.

[aresfiend]

You wouldn't need a QEV for the eXTCy, and the only issues I see is that you'd need to make/modify a VASA for it as well as find a solenoid to set up with the Star frame that will reach both banjo fittings on the eXTCy.

[xXhunter47Xx]

I can't keep the regular VASA on it?
If it's because the frame can't fit I can shave it down.

And couldn't I just use the Extcy Solenoid? Wire it to the Starframe's board.

[aresfiend]

Originally Posted by xXhunter47Xx

I can't keep the regular VASA on it?
If it's because the frame can't fit I can shave it down.

Not as it is because it's part of the stock frame and it can't be mounted on it's own without even further modification.

And couldn't I just use the Extcy Solenoid? Wire it to the Starframe's board.

You'd have to modify the eXTCy noid to have solenoid wires first.

[xXhunter47Xx]

oh.
Well I feel stupid now.

[aresfiend]

Originally Posted by xXhunter47Xx

oh.
Well I feel stupid now.

You could probably modify the stock VASA, but it'd be easier to modify the Etek VASA and get a different noid or a custom manifold. If you're good with a soldering iron you could also probably put some wires on the noid pretty easily.

[xXhunter47Xx]

Or I could just buy a "for parts" Shocker and a Starframe.
Sounds a lot easier than this, haha.

[aresfiend]

Originally Posted by xXhunter47Xx

Or I could just buy a "for parts" Shocker and a Starframe.
Sounds a lot easier than this, haha.

Even then you can't just slap the Star frame on the shocker. If you buy a "for parts" shocker you also might have to fix more problems than you think you're in for.

[xXhunter47Xx]

While true, it must be much easier than making a new manifold for an Extcy.
All I need for the shocker is a working engine and solenoid, no?

Following steps of here: http://www.pbnation.com/showthread.php?t=1937487

[inmylife2415]

A shocker noid won't fit in the star frame, you would need an 05/06 ego noid for that to work

[xXhunter47Xx]

Then I shall buy a Dark Ego5 frame.

That would work no?

[aresfiend]

Originally Posted by xXhunter47Xx

Then I shall buy a Dark Ego5 frame.

That would work no?

You can fit an Ego 5/6 solenoid in a Star frame.

[inmylife2415]

Originally Posted by xXhunter47Xx

Then I shall buy a Dark Ego5 frame.

That would work no?

The dark came with an 06 star frame, that will work with a shocker noid. I was referring to the etek star frame last post.

Originally Posted by aresfiend

You can fit an Ego 5/6 solenoid in a Star frame.

Yes, it will bolt right on a shocker manifold

[xXhunter47Xx]

But I was referring to buying a Dark frame to mount the Shocker noid to.
Can the Ego noid actuate the Shocker Engine? Because the Ego is a poppit and the shocker a spool, I'm afraid that the ego solenoid won't work.

Because if it does then that would save me a lot of time and money and pain.

[inmylife2415]

Ego 5/6 will indeed work with a shocker, they are both 4way noids

[xXhunter47Xx]

OH GOD YES

That has made this project idea so much easier.

[RabidHobo]

it would be loads easier with a Intimidator frame, and theyre not too hard to come by.

find you like an automag asa, and just use a 1/8npt to 10-32 adaptor with a barb