[HeadHunter59]

Originally Posted by eg92b16a2

I had one of my ninja tank repaired but last weekend after a practice session I notice when cleaning my gun and tank notice that I have a chunk of the gel coat popped off the tank. What can I do to get the tank repaired? The fiber is not damaged. I am a back player so no crazy dives.

Thanks...

Will be fine. They have a new coating they are using now. Follow link below to have fixed.

http://97.74.153.121/NinjaWarrantyTa...s/warranty.php

Originally Posted by monkeyhobo28436

So I'm soon to be receiving a Ninja SLP tank regulator, and I was wondering if there would be any issues installing the SLP reg on a 3000psi bottle rather than a 4500psi?

I'm assuming not but just wanting to double-check. Sorry if it's a silly question

Nope will be perfectly fine. Just wont get as many shots out of 3000 compared to the 4500.

[f8al]

Since this week is Paintball Extravaganza, most of the Ninja staff is at the event. To my knowledge Rob is the only sales person there, and since he is traditionally the one that checks this thread people like HeadHunter59 and myself (among others I'm sure) will be helping out. We will be sure to help you all out, it just might take a little longer this week

[Rob @ Ninja PB]

Originally Posted by eg92b16a2

I had one of my ninja tank repaired but last weekend after a practice session I notice when cleaning my gun and tank notice that I have a chunk of the gel coat popped off the tank. What can I do to get the tank repaired? The fiber is not damaged. I am a back player so no crazy dives.

Thanks...

Give us a call at 877-646-5287 x309. I'll see if I can help you out. Just mentioned you're the person that posted on the Ask A Ninja Tech thread about your bottle getting cracks.

[Deadly Assassin]

Hey rob I just bought a tank that has the UltraLite adjustable reg on it. Now I want the OP to be at 550, How many shims do i need in it and it what order?
The manual only told you how to get 500 or 600. Thanks

P.S. i bought the tank used so I don't know if it has already been adjusted. It came with 2 silver shims under 2 red shims

EDIT : Talked to you on the phone thank you very much sir.

[wildspinx]

I know it has been answered many a times, but I cannot find a solid answer if I want my ninja reg low pressure, I leave the 2 silver shims in and remove the two reg shims? Or should there be no shims in it at all?

[f8al]

Originally Posted by wildspinx

I know it has been answered many a times, but I cannot find a solid answer if I want my ninja reg low pressure, I leave the 2 silver shims in and remove the two reg shims? Or should there be no shims in it at all?

Yes wildspinx, that is exactly what you should do for an LP output. You can also remove the silver shims as well to achieve a slightly lower pressure, but leaving them in will not make a huge difference (I wanna say like 25-50 psi difference tops)

[yeahbuddyy]

have an older style standard ninja adjustable reg (1 red oring) on a 45/45 trying to get it around 550psi for an axe. Bought used and currently it has one red one silver shim. What to do? Thanks

[f8al]

Originally Posted by yeahbuddyy

have an older style standard ninja adjustable reg (1 red oring) on a 45/45 trying to get it around 550psi for an axe. Bought used and currently it has one red one silver shim. What to do? Thanks

That is the configuration that you would need/want for a mid range output for the Axe. it sounds to me like the person you got it from did not include the other red shim when they sent you the tank. You can get a rebuild kit from your local shop or favorite online Ninja retailer if you want to get that other shim back among other parts to maintain the regulator.

[yeahbuddyy]

Originally Posted by f8al

That is the configuration that you would need/want for a mid range output for the Axe. it sounds to me like the person you got it from did not include the other red shim when they sent you the tank. You can get a rebuild kit from your local shop or favorite online Ninja retailer if you want to get that other shim back among other parts to maintain the regulator.

alright ill probably just keep this config since you said it should be mid already and it has worked fine thus far. Thanks

[f8al]

Originally Posted by yeahbuddyy

alright ill probably just keep this config since you said it should be mid already and it has worked fine thus far. Thanks

No problem at all my man. Truth be told the mid pressure output will work great for pretty much every gun out there but the Bob Long line and the Vapor I believe. Outside of those handful of markers you should pretty much always be safe with an MP output.

[xxdeedotxx]

is the NINJA PRO SLP Regulator adjustable as far as output pressure?

[xmc1146]

Anyone know where i could buy just the tank only? Looking for the 50/45 tank and will ninja be making a duro tank for this as well?

[f8al]

Originally Posted by xxdeedotxx

is the NINJA PRO SLP Regulator adjustable as far as output pressure?

The SLP is not an adjustable output regulator unfortunately. It is a preset output and should not be messed with. You can use the Standard Adjustable PRO regulator if you want the adjustability.

Originally Posted by xmc1146

Anyone know where i could buy just the tank only? Looking for the 50/45 tank and will ninja be making a duro tank for this as well?

As it stands there are not plans for a DURA 50ci tank. You can also not buy just a bottle from Ninja as it is a liability on their end with regulators not being properly affixed to the bottle. Your best bet is to peruse the BST for one that someone may be selling.

[Rob @ Ninja PB]

F8al - once again, thank you for the assistance while we were short-staffed with people at Paintball Extravaganza! I can't tell you how much we appreciate the help

[f8al]

Originally Posted by Rob @ Ninja PB

F8al - once again, thank you for the assistance while we were short-staffed with people at Paintball Extravaganza! I can't tell you how much we appreciate the help

As always, I'm more than happy to help

[furbyballer]

will ninja or anyone else be coming out with a tank cover of some sort to fit the 77? I would love one and I think others would as well since the size of this tank is just so great.

[-Lightning-]

Originally Posted by furbyballer

will ninja or anyone else be coming out with a tank cover of some sort to fit the 77? I would love one and I think others would as well since the size of this tank is just so great.

Exalt makes one. I love it.

[Rob @ Ninja PB]

Originally Posted by furbyballer

will ninja or anyone else be coming out with a tank cover of some sort to fit the 77? I would love one and I think others would as well since the size of this tank is just so great.

maaaaaaaybe

Lets just say we have a project we just started on Monday that may be exactly what you're looking for. Of course, this will take a few months to happen, if at all. Give us some time and we might have something for ya by beginning or mid-summer.

[furbyballer]

Chicago timeline maybe... One can hope!

[Rob @ Ninja PB]

Originally Posted by furbyballer

Chicago timeline maybe... One can hope!

haha keep an eye on our Ninja facebook wall or Paintball News on PBN. If we do come out with a tank cover for the 77, it will be posted in both of those places.

[Ball1n Azn]

I'm sure Ninja will have tanks available for sale at PSP Dallas, but would one be able to purchase just the bottle?

Thanks