Originally Posted by avengeddisciple
alright thanks guys I really appreciate it.
I really wanted to throw a cp reg on it but had no idea in Hell as to how I could do it. so just get the female piece get it in there get the reg in it and run a new macro line and chrono it
Pretty much, but with that small a valve chamber you'll need to re-spring it or bore the chamber out to 2k+ spec to make it run at a reasonable pressure (under 500 PSI), I would just add an expansion chamber rather than a reg, chrono with the IVG (as much of a pain as it is, having to take the cocking rod off for every adjustment) and call it a day.