creed leaking!

ballahamman32 · 02-19-2013, 03:47 PM

Hello pbnation having some issues with my creed at the moment!

I air it up and it will leak until i shoot one or sometimes two times, not to worried about this but would like to fix it if possible. After it stops leaking a lot after the first couple shots it still has a slight leak in the body somewhere and cant seem to pinpoint it down, any suggestions?

Anything will help thanks in advance!

pinoyed · 02-19-2013, 04:31 PM

The valve body might need cleaning.

Reaper (ACI) · 02-19-2013, 04:38 PM

Check the poppet o-ring and valve body. Like already stated, it could be dirty, sometimes debris gets between the ram and poppet inside the valve.

ballahamman32 · 02-19-2013, 06:57 PM

Ok ill give that a look and let you know!

MstrKey · 02-19-2013, 11:03 PM

Replace your ram oring. If it's worn you'll get a small leak out of the noid. The fact it seals up after a shot(for the most part) leads me to suspect this is your problem.

I'd do this before ripping the valve open......only because it's a far simpler thing to check. May as well start at the simple stuff first. That's my MO lol.

ballahamman32 · 02-20-2013, 05:41 AM

Quote:

Originally Posted by MstrKey

Replace your ram oring. If it's worn you'll get a small leak out of the noid. The fact it seals up after a shot(for the most part) leads me to suspect this is your problem.

I'd do this before ripping the valve open......only because it's a far simpler thing to check. May as well start at the simple stuff first. That's my MO lol.

True true