[GrimCPT]

What kind of molex connector does it use, where can I get one and how hard is it to get it crimped? Basically I picked up a marq and the only thing wrong is the guy pulled off the connector on the noid. If I can fix it for under 30$ it would be 100% worth it. I am also marginally competent when it comes to working with electronics and wiring.

[blueshifty]

Here broski:

http://www.pbnation.com/showthread.php?t=2636329

It takes a $400 crimp tool to do it right, but with some spares I think you can get an adequate crimp with some needle nose pliers.

[StyngRay2]

or just find a blown/used noid on bst, cut the connector off, resolder it to your noid and BAM,...you're good....

[GrimCPT]

Yeah, im going try it, turns out its the same connector as my vikings so i have a couple spare leads.