Find fields & stores near you!
Find fields and stores
Zipcode
PbNation News
PbNation News
Community Focus
Community Focus

Reply
 
Thread Tools
Old 02-13-2013, 08:13 PM #1
Rmilledge32
 
 
Join Date: Oct 2012
Location: Indiana
Rmilledge32 supports DLX Technology
Spacer body ? NT10

Ok ive been looking all over and kinda tested it out but i didnt notice a lot of difference...

Ive got my Nt set at

dwell:9
PSI-125
Spacer body with 0 inserts
blue flow insert

I took the spacer body off thinking it would reduce recoil it may have slightly but do you NEED the spacer body on the bolt? I've been looking all over and cant find a definite answer... i play 3v3 xball, front and don't need efficiency just smooth and on target.

Should have my green flow insert tomorrow also and don't want to use body spacer on it if i dont need it.

Thanks!
Rmilledge32 is offline   Reply With Quote
Old Sponsored Links Remove Advertisement
Advertisement
Old 02-13-2013, 08:19 PM #2
3ll3nwood
 
 
Join Date: Apr 2004
Location: GA
 has been a member for 10 years
I've been running mine at

Dwell: 8
PSI - 135
No spacers/spacer body (I don't even own any inserts/spacers at all)
Blue Flow Insert

Don't know about efficiency numbers but the gun shot nicely all day.

This had me right around 290 fps +/-6. Not sure how broken in my internals are, haven't had the gun in my possesion long.

In short, no, you don't have to have the spacer body in the gun for it to operate but you should notice an fps increase by up to 20 when you take it out and keep your settings the same.
__________________
Feedback
3ll3nwood is offline   Reply With Quote
Old 02-13-2013, 08:25 PM #3
Rmilledge32
 
 
Join Date: Oct 2012
Location: Indiana
Rmilledge32 supports DLX Technology
Alright.. awesome cause i think the green insert with no body or inserts on it... is supposed to be amazingly smooth
Rmilledge32 is offline   Reply With Quote
Reply


Thread Tools

Posting Rules
Forum Jump