Find fields & stores near you!
Find fields and stores
Zipcode
PbNation News
PbNation News
Community Focus
Community Focus

Reply
 
Thread Tools
Old 02-11-2013, 10:07 AM #1
combinator
 
 
Join Date: Feb 2009
Location: Sweden
combinator supports DLX Technology
Ego11 w/ D.A.R.T-Bolt and Reballs

Hi

First of:

- Ego11 with DART-kit, SFR:s at Rear=1, Front=8 (Set both at 10/10, same issue)
- Shooting Millenium-ramp@ 10 bps
- Same issue with Eyes On or Eyes Off
- Deadlywind Fibur with insert .675 (Reballs are .670)
- Ninja 68/45 with output at approx. 550 psi
- Tried with Rotor v.3 and a Reloader B2 with Smart-Guide installed
(Not having a issue with these two loaders on my luxe with the same reballs)

I am experiencing a issue with my Ego11 with DART-kit, when iīm shooting Reballs…

Single-shots works fine, but when i start shooting as stream of reballs it shoots a very inconsistent stream.
Iīt feels almost like the bolt is bouncing of the reballs, like the lpr/ram is keeping up with the BPS-limit.

Anyone else is experiencing this?
I have not tried my Ego with paint, so i canīt say the problem is there swell.


- Edit: forgot to mention that i stalled the original valve and bolt, and the problem is gone.
Ego shoots like it should so the issue is somewhere in the dart bolt/valve

Last edited by combinator : 02-11-2013 at 10:09 AM. Reason: Added info
combinator is offline   Reply With Quote
Old Sponsored Links Remove Advertisement
Advertisement
Old 02-12-2013, 11:50 AM #2
Jack Wood
 
 
Jack Wood's Avatar
 
Join Date: Jul 2001
Location: Planet Eclipse, England
Annual Supporting Member
Jack Wood is a founding member
 has been a member for 10 years
Jack Wood works for a Paintball manufacturer
Jack Wood owns a Planet Eclipse GSL
What happens if you use the stock bolt and the Dart Valve?

Have you tried increasing the dwell slightly?
Jack Wood is offline   Reply With Quote
Old 02-12-2013, 01:53 PM #3
combinator
 
 
Join Date: Feb 2009
Location: Sweden
combinator supports DLX Technology
I did try the original cure 3 with the brass-insert and still the same problem.
I havenīt tried the cure 3 as it comes standard on the ego 11 along with the dart-valve.
Increasing dwell is something i didnīt try, how many milli-seconds should i aim for? What is an upper limit if there is one?

Thanks for the help, i know a couple of other Ego11 with DART-kits installed here in Sweden that would love a cure to our little problem.
combinator is offline   Reply With Quote
Old 02-12-2013, 03:03 PM #4
alabamapaintball
Dorito1
 
alabamapaintball's Avatar
 
Join Date: Feb 2013
Location: Mobile,Alabama
alabamapaintball owns a Planet Eclipse Ego
alabamapaintball supports Team VICIOUS
alabamapaintball has achieved Level 2 in PbNation Pursuit
alabamapaintball supports DLX Technology
reballs

i wouldnt use reballs with the dart kit
alabamapaintball is offline   Reply With Quote
Old 02-17-2013, 12:20 PM #5
combinator
 
 
Join Date: Feb 2009
Location: Sweden
combinator supports DLX Technology
Update: Today i hade the same issue with my original valve/bolt-combo.
Very strange indeed, but at least the problem doesīt seem connected to only the DART-kit.
combinator is offline   Reply With Quote
Old 02-17-2013, 10:12 PM #6
ego warrior
 
 
ego warrior's Avatar
 
Join Date: Nov 2012
Location: west virginia
ego warrior owns a Planet Eclipse Ego
what loader you using
ego warrior is offline   Reply With Quote
Old 02-17-2013, 10:14 PM #7
ego warrior
 
 
ego warrior's Avatar
 
Join Date: Nov 2012
Location: west virginia
ego warrior owns a Planet Eclipse Ego
never mind i see. i had the same problem with a rotor but worked fine with a v-max
ego warrior is offline   Reply With Quote
Reply


Thread Tools

Posting Rules
Forum Jump