[fatballer189]

So trying to get this working. It has been sitting for a few years an need to get it back on the field.

The biggest issues that I can not resolve at TE moment is the LPR. Yes I checked stickies for help first but could not see a solution.

At the moment I can not get the LPR pressure to go down. I tried to re set the reg but even with it completely backed out the gauge still registers above 100psi. Not sure if my gauge is busted or not. It also seems to increase in pressure when I up the HPR.

I have a fresh battery in it. I have. Not re lubber the LPR but will do that to other. So if anyone has any tips or ideas that would help I am open to ideas.

Also gun is mostly stock with exception of Virtue board an cp reg.

Also I believe that this was one of Zach Longs 06's an heard that some "special" things might have been done to it but have no proof or knowledge of what might have been done. Just thought I would me mention it I case it was helpful.

Thanks in advance.

[gamer565]

Replace the base/square oring on the LPR.

[Achilles_21]

Originally Posted by gamer565

Replace the base/square oring on the LPR.

[fatballer189]

Originally Posted by gamer565

Replace the base/square oring on the LPR.

I am guessing just contact blast to get one?

[gamer565]

Originally Posted by fatballer189

I am guessing just contact blast to get one?

If you have a oring kit, just replace it yourself..

Or get a kit and do it.

[fatballer189]

Originally Posted by gamer565

If you have a oring kit, just replace it yourself..

Or get a kit and do it.

Don't have a kit an not sure where to get one.

[gamer565]

Originally Posted by fatballer189

Don't have a kit an not sure where to get one.

Captain oring, oringmonkey.

Little bit of research won't hurt.

[fatballer189]

Originally Posted by gamer565

Captain oring, oringmonkey.

Little bit of research won't hurt.

Yeah felt stupid after posting that and found some O-Ring kits...