Find fields & stores near you!
Find fields and stores
Zipcode
PbNation News
PbNation News
Community Focus
Community Focus

Reply
 
Thread Tools
Old 02-10-2013, 04:53 PM #1
skateandpaint
 
 
skateandpaint's Avatar
 
Join Date: Apr 2005
Location: NYC queens
skateandpaint is playing at Living Legends VI
skateandpaint has achieved Level 2 in PbNation Pursuit
skateandpaint has achieved Level 3 in PbNation Pursuit
I think i got screwed..a little

Ok so my shocker has been working great since i purchased it a few days after xmas and i am all about "if it aint broke dont fix it" so i didnt open it up upon arrival it make sure it had the tech t bolt which the seller claimed it had...and i opened it up today for the first time after around 1000 shots (half dry fire half paint) just to check out the shocker internals for the first time and greese it up. The first thing that drew my attention was the fact that the firing can stayed in he gun when i pushed the bolt out of the front. and i see no he oring and i also couldnt get the front part of the can to unscrew (could be my fault so help is appreciated) ...

anyways i provided a pic so you guys can confirm but im pretty sure its just a stock non he bolt



should i contact the seller for compensation or not worth the trouble?
__________________
old feedback +5
http://www.pbnation.com/showthread.p...9#post31895049

Currently shooting - PM7 with dye UL barrel, CP on/off, CCM feedneck, CP reg
48/45 with ninja reg
Reloader b
skateandpaint is offline   Reply With Quote
Old Sponsored Links Remove Advertisement
Advertisement
Old 02-10-2013, 04:59 PM #2
inmylife2415
SBPB
 
inmylife2415's Avatar
 
Join Date: Jan 2008
Location: Madison
inmylife2415 supports DLX Technology
U didn't notice your bolts wasn't forward with no air on it?
inmylife2415 is offline   Reply With Quote
Old 02-10-2013, 05:05 PM #3
skateandpaint
 
 
skateandpaint's Avatar
 
Join Date: Apr 2005
Location: NYC queens
skateandpaint is playing at Living Legends VI
skateandpaint has achieved Level 2 in PbNation Pursuit
skateandpaint has achieved Level 3 in PbNation Pursuit
didnt know it was supposted to be..but now that i think of it it shud cuz of the spring...im so tight should i contact the seller?
__________________
old feedback +5
http://www.pbnation.com/showthread.p...9#post31895049

Currently shooting - PM7 with dye UL barrel, CP on/off, CCM feedneck, CP reg
48/45 with ninja reg
Reloader b
skateandpaint is offline   Reply With Quote
Old 02-10-2013, 05:09 PM #4
inmylife2415
SBPB
 
inmylife2415's Avatar
 
Join Date: Jan 2008
Location: Madison
inmylife2415 supports DLX Technology
Yes I would talk to him about it
inmylife2415 is offline   Reply With Quote
Old 02-10-2013, 06:06 PM #5
ka-titties
They call me D1
 
ka-titties's Avatar
 
Join Date: Feb 2013
Location: Near that guy you know
ka-titties plays in the APPA D4 division
ka-titties has achieved Level 2 in PbNation Pursuit
ka-titties supports DLX Technology
ka-titties supports Empire
you used PayPal, i hope?
ka-titties is offline   Reply With Quote
Old 02-10-2013, 06:25 PM #6
skateandpaint
 
 
skateandpaint's Avatar
 
Join Date: Apr 2005
Location: NYC queens
skateandpaint is playing at Living Legends VI
skateandpaint has achieved Level 2 in PbNation Pursuit
skateandpaint has achieved Level 3 in PbNation Pursuit
but of course
__________________
old feedback +5
http://www.pbnation.com/showthread.p...9#post31895049

Currently shooting - PM7 with dye UL barrel, CP on/off, CCM feedneck, CP reg
48/45 with ninja reg
Reloader b
skateandpaint is offline   Reply With Quote
Old 02-10-2013, 06:36 PM #7
skateandpaint
 
 
skateandpaint's Avatar
 
Join Date: Apr 2005
Location: NYC queens
skateandpaint is playing at Living Legends VI
skateandpaint has achieved Level 2 in PbNation Pursuit
skateandpaint has achieved Level 3 in PbNation Pursuit
the seller is trying to tell me he sent the tect bolt
__________________
old feedback +5
http://www.pbnation.com/showthread.p...9#post31895049

Currently shooting - PM7 with dye UL barrel, CP on/off, CCM feedneck, CP reg
48/45 with ninja reg
Reloader b
skateandpaint is offline   Reply With Quote
Old 02-10-2013, 06:37 PM #8
gutgut2hi68
Proud Shocker Owner
 
gutgut2hi68's Avatar
 
Join Date: Oct 2012
Location: California
gutgut2hi68 has achieved Level 1 in PbNation Pursuit
yuuuuuup, he screwed u. U have a stock bolt there, and the techt bolt should be gold in color, and the porting shouldn't be little holes like you see in your picture, they should be ovular in shape, and like inmylife said, the bolt should be in the forward position while degassed. You should definitely get a hold of hm and find out what's up. In the event he decides to reimburse you for your troubles and missing bolt, you should pick up an eigen bolt from lurker paintball. Much better than the techt bolt, and you already have a stock non he can, which works great with the eigen. Look into that if you want, good luck.
gutgut2hi68 is offline   Reply With Quote
Old 02-10-2013, 06:40 PM #9
skateandpaint
 
 
skateandpaint's Avatar
 
Join Date: Apr 2005
Location: NYC queens
skateandpaint is playing at Living Legends VI
skateandpaint has achieved Level 2 in PbNation Pursuit
skateandpaint has achieved Level 3 in PbNation Pursuit
Quote:
Originally Posted by gutgut2hi68 View Post
yuuuuuup, he screwed u. U have a stock bolt there, and the techt bolt should be gold in color, and the porting shouldn't be little holes like you see in your picture, they should be ovular in shape, and like inmylife said, the bolt should be in the forward position while degassed. You should definitely get a hold of hm and find out what's up. In the event he decides to reimburse you for your troubles and missing bolt, you should pick up an eigen bolt from lurker paintball. Much better than the techt bolt, and you already have a stock non he can, which works great with the eigen. Look into that if you want, good luck.
does the stock can have the piece that screws off? because i couldnt get anything to screw off it seemed like a solid piece to me...and im talking to the seller and he claims its a tech t bolt
__________________
old feedback +5
http://www.pbnation.com/showthread.p...9#post31895049

Currently shooting - PM7 with dye UL barrel, CP on/off, CCM feedneck, CP reg
48/45 with ninja reg
Reloader b
skateandpaint is offline   Reply With Quote
Old 02-10-2013, 06:45 PM #10
gutgut2hi68
Proud Shocker Owner
 
gutgut2hi68's Avatar
 
Join Date: Oct 2012
Location: California
gutgut2hi68 has achieved Level 1 in PbNation Pursuit
The stock can is a one piece part, the HE can is a two piece, however it doesn't "unscrew" it is actually held together with a 20/70 o-ring and "snaps" into place.
gutgut2hi68 is offline   Reply With Quote
Old 02-10-2013, 06:48 PM #11
skateandpaint
 
 
skateandpaint's Avatar
 
Join Date: Apr 2005
Location: NYC queens
skateandpaint is playing at Living Legends VI
skateandpaint has achieved Level 2 in PbNation Pursuit
skateandpaint has achieved Level 3 in PbNation Pursuit
sounds like less orings for me to deal with sweet...he just msgd back saying "its an early run tech t bolt"
__________________
old feedback +5
http://www.pbnation.com/showthread.p...9#post31895049

Currently shooting - PM7 with dye UL barrel, CP on/off, CCM feedneck, CP reg
48/45 with ninja reg
Reloader b
skateandpaint is offline   Reply With Quote
Old 02-10-2013, 06:50 PM #12
inmylife2415
SBPB
 
inmylife2415's Avatar
 
Join Date: Jan 2008
Location: Madison
inmylife2415 supports DLX Technology
He's not telling the truth
inmylife2415 is offline   Reply With Quote
Old 02-10-2013, 06:51 PM #13
MachineGunCrew
Never Say Die
 
MachineGunCrew's Avatar
 
Join Date: Apr 2006
Location: IDAHO
MachineGunCrew plays in the PSP
MachineGunCrew owns a Planet Eclipse Geo
MachineGunCrew is Legendary
MachineGunCrew supports DLX Technology
MachineGunCrew owns a Planet Eclipse GSL
that is an old base shocker bolt. I have the exact same one sitting in my tool box.
__________________
HKarmy
MachineGunCrew is offline   Reply With Quote
Old 02-10-2013, 06:52 PM #14
skateandpaint
 
 
skateandpaint's Avatar
 
Join Date: Apr 2005
Location: NYC queens
skateandpaint is playing at Living Legends VI
skateandpaint has achieved Level 2 in PbNation Pursuit
skateandpaint has achieved Level 3 in PbNation Pursuit
should i start being a hard ***..and what kind of compensation should be in order
__________________
old feedback +5
http://www.pbnation.com/showthread.p...9#post31895049

Currently shooting - PM7 with dye UL barrel, CP on/off, CCM feedneck, CP reg
48/45 with ninja reg
Reloader b
skateandpaint is offline   Reply With Quote
Old 02-10-2013, 07:01 PM #15
MachineGunCrew
Never Say Die
 
MachineGunCrew's Avatar
 
Join Date: Apr 2006
Location: IDAHO
MachineGunCrew plays in the PSP
MachineGunCrew owns a Planet Eclipse Geo
MachineGunCrew is Legendary
MachineGunCrew supports DLX Technology
MachineGunCrew owns a Planet Eclipse GSL
well I'd try to get some money back. i'd leave negative feedback if the seller refuses to fix the problem he knowingly created.
__________________
HKarmy
MachineGunCrew is offline   Reply With Quote
Old 02-10-2013, 07:13 PM #16
inmylife2415
SBPB
 
inmylife2415's Avatar
 
Join Date: Jan 2008
Location: Madison
inmylife2415 supports DLX Technology
Its like a 20 to 25 dollhair difference
inmylife2415 is offline   Reply With Quote
Old 02-10-2013, 07:18 PM #17
gutgut2hi68
Proud Shocker Owner
 
gutgut2hi68's Avatar
 
Join Date: Oct 2012
Location: California
gutgut2hi68 has achieved Level 1 in PbNation Pursuit
Actually, that bolt costs 60 bux I believe from texht. You should tell him to quit lying and supply him a link to this particular thread as proof of what's happening.
gutgut2hi68 is offline   Reply With Quote
Old 02-10-2013, 07:26 PM #18
inmylife2415
SBPB
 
inmylife2415's Avatar
 
Join Date: Jan 2008
Location: Madison
inmylife2415 supports DLX Technology
No it doesn't, its like 35 or 40 new
inmylife2415 is offline   Reply With Quote
Old 02-10-2013, 07:40 PM #19
mohpimp82
]v[.[].]-[.
 
mohpimp82's Avatar
 
Join Date: Apr 2004
Location: MEMPHIS 10
 has been a member for 10 years
mohpimp82 plays in the PSP
mohpimp82 plays in the APPA D3 division
mohpimp82 supports DLX Technology
There were no early run techt bolts. There were however, per-production bolts and they looked like these.
__________________
Anthony Moretta
MEMPHIS CODSquad--ZULU Warriors
MSF*iSPY
www.FxAnodizing.com
mohpimp82 is offline   Reply With Quote
Old 02-11-2013, 09:56 AM #20
K-9
name's ryon. hi
 
K-9's Avatar
 
Join Date: Nov 2003
Location: khm
Annual Supporting Member
 has been a member for 10 years
K-9 plays in the PSP
K-9 donated to help Peyton Trent
K-9 supports DLX Technology
Seller is a liar and he knows it
That's a base 03 shocker bolt kit
There is no such thing as a preproduction TechT bolt kit
Link him to this thread
Or hell PM me his username and I'll PM him to tell him he's a liar
K-9 is offline   Reply With Quote
Old 02-11-2013, 11:46 AM #21
skateandpaint
 
 
skateandpaint's Avatar
 
Join Date: Apr 2005
Location: NYC queens
skateandpaint is playing at Living Legends VI
skateandpaint has achieved Level 2 in PbNation Pursuit
skateandpaint has achieved Level 3 in PbNation Pursuit
i linked him to the thread and all he is offering me is the money i paid but i dont want to get rid of the shocker...he is trying to justify it by the fact that he sold it cheap to me
__________________
old feedback +5
http://www.pbnation.com/showthread.p...9#post31895049

Currently shooting - PM7 with dye UL barrel, CP on/off, CCM feedneck, CP reg
48/45 with ninja reg
Reloader b
skateandpaint is offline   Reply With Quote
Reply


Thread Tools

Posting Rules
Forum Jump