[Tapok]

Hello guys!

So I recently picked up a Vanguard Demon with 2012 internals. I went to play reball with it and it did not work so well. I used a pro ninja 68/4500 running at around 550 output. My problem was that whenever I went to chrono the gun would shoot fine, it would dry-fire fine too, however, when I started shooting fast the reballs would hardly fly. It looked like they were coming out at about 200. It would jam a lot too. Some people said its the 2012 internals and some people said my reg is not recharging fast enough. I haven't shot real paint with it yet. I was using a spire too.

So again, the gun would one-shot fine but could not shoot a rope. It would puff out balls. Any ideas? Thanks brothers!

[xmc1146]

it could be your hopped or reball is not lube.

[Tapok]

Originally Posted by xmc1146

it could be your hopped or reball is not lube.

No the hopper fed fine with other guns. And I can't really do anything about the balls but everyone else was shooting fine.

[enemy master]

i had this problem with normal paint. Your problem your reg on the gun is dirty and old. Take apart the reg and re-lube.

[Tapok]

Originally Posted by enemy master

i had this problem with normal paint. Your problem your reg on the gun is dirty and old. Take apart the reg and re-lube.

Will do! Thanks

Anyone else got advices?