 |
|
02-09-2013, 08:22 PM
|
#1
|
|
|
G3 out the box problems
I have a brand new one that shot once but never did since. It clicks but won't shoot. When I turn the bottom of my reg counter clockwise to adjust my air flow it's eventually starts to leak but doesn't shoot. It makes the clicking noise with eyes off so I don't kno why it's not shooting, Im so confused
|
|
|
|
02-09-2013, 08:23 PM
|
#2
|
|
www.YetiPB.com
Join Date: Mar 2007
Location: Washington DC
|
Have you turned up the high pressure regulator per instructions in the manual?
|
|
|
|
02-09-2013, 08:33 PM
|
#3
|
|
|
Quote:
Originally Posted by Yeti6669
Have you turned up the high pressure regulator per instructions in the manual?
|
The Manuel just says to start with it turned all the way in or clockwise. Then loosen it to the average pressure but it does nothin but eventually leak cuz I keep turnin it counterclockwise |
|
|
|
|
02-09-2013, 08:36 PM
|
#4
|
|
Join Date: Feb 2010
Location: Northern CA
|
How much did you turn the velocity adjustment screw? Did you pull the trigger to try and shoot every 1/8 to 1/4 of a turn? Did you keep the eyes off while trying to dry-fire?
__________________
Graphite Dangerous Power REV-I
– TechT bolt engine, REV-I & Disruptive barrel kits, Prophecy V2 w/ Empire feedgate, Crossfire SS 68/4500
Maroon and Polished Aluminum Dangerous Power Threshold
– 7th Element board, TechT bolt engine, magnet trigger kit, REV-I PMD, Sly Dual Carbon barrel kit, Prophecy V2, Crossfire SS 68/4500
Black and Silver Dangerous Power F8
– APE Rampage board, VS bolt, magnet trigger kit, F8 gauge, REDZ barrel kit, Halo B w/ Exalt feedgate, PMI 68/4500
Polished Aluminum and Red Dangerous Power F8
– Virtue board, VS bolt, magnet trigger kit, Halo B w/ Exalt feedgate, PMI 68/4500
|
|
|
|
|
02-09-2013, 08:38 PM
|
#5
|
|
Fox Battalion II
|
Quote:
Originally Posted by Vrodryda
I have a brand new one that shot once but never did since. It clicks but won't shoot. When I turn the bottom of my reg counter clockwise to adjust my air flow it's eventually starts to leak but doesn't shoot. It makes the clicking noise with eyes off so I don't kno why it's not shooting, Im so confused
|
did you try a different reg? new pattery? make sure its not over lube? try to take out the bolt and easily air it out to make sure the air is going through the chamber. |
|
|
|
|
02-09-2013, 08:44 PM
|
#6
|
|
|
Quote:
Originally Posted by xmc1146
did you try a different reg? new pattery? make sure its not over lube? try to take out the bolt and easily air it out to make sure the air is going through the chamber.
|
I relubed it lightly, I tried a ion reg and it didn't work either. And I've tried battery's. I haven't aired I up with out the bolt I'll have to try tht |
|
|
|
|
02-09-2013, 08:45 PM
|
#7
|
|
|
Quote:
Originally Posted by CA_Tectonics
How much did you turn the velocity adjustment screw? Did you pull the trigger to try and shoot every 1/8 to 1/4 of a turn? Did you keep the eyes off while trying to dry-fire?
|
Yea man. It will started to leak but never shoots |
|
|
|
|
02-09-2013, 08:47 PM
|
#8
|
|
Fox Battalion II
|
Quote:
Originally Posted by Vrodryda
I relubed it lightly, I tried a ion reg and it didn't work either. And I've tried battery's. I haven't aired I up with out the bolt I'll have to try tht
|
could be just it needs a new battery or service the noid. worst case scenario is you have to change the noid which by the way is very cheap. but first things first is change the battery if it still doing the same thing service the noid if it still doing the same thing change the noid. |
|
|
|
|
02-09-2013, 08:53 PM
|
#9
|
|
|
Quote:
Originally Posted by xmc1146
could be just it needs a new battery or service the noid. worst case scenario is you have to change the noid which by the way is very cheap. but first things first is change the battery if it still doing the same thing service the noid if it still doing the same thing change the noid.
|
I've already serviced the noid. It still makes the electronic clicking noise when I pull the trigger though. Would it still make tht noise if the noid was bad? It's a Limited edition if tht makes a diff, they have diff boards |
|
|
|
|
02-09-2013, 08:54 PM
|
#10
|
|
|
Yeah noid could still click but piston may not move. Is this a G3 or a G4? Saw you posted in the G4 area as well.
|
|
|
|
|
02-09-2013, 08:59 PM
|
#11
|
|
|
Quote:
Originally Posted by GraniteGargoyle
Yeah noid could still click but piston may not move. Is this a G3 or a G4? Saw you posted in the G4 area as well.
|
G3 SE |
|
|
|
|
02-09-2013, 09:10 PM
|
#12
|
|
|
Just for a matter of trying everything. Maybe reset the board to factory settings too.
|
|
|
|
|
02-09-2013, 09:12 PM
|
#13
|
|
|
Quote:
Originally Posted by GraniteGargoyle
Just for a matter of trying everything. Maybe reset the board to factory settings too.
|
I could figure out how to do tht. I wanted to do tht. The Manuel didn't tell me |
|
|
|
|
02-09-2013, 09:16 PM
|
#14
|
|
Fox Battalion II
|
the noid would also click without enough battery power.
|
|
|
|
|
02-09-2013, 09:28 PM
|
#15
|
|
|
Well I tried 3 diff battery's all new, and I've serviced the noid. It shot a couple times before I serviced the noid but it wouldn't steady shoot. It would shoot then a shoot a small puff. I serviced the noid and now it wont shoot period. But clicks
|
|
|
|
|
02-09-2013, 09:29 PM
|
#16
|
|
|
Noid from Dp website is 35$ that's not cheap. Think I could find em cheaper
|
|
|
|
|
02-09-2013, 09:33 PM
|
#17
|
|
DPOTer since 2007
Join Date: Apr 2007
Location: Bloomington, Ill-a-noiz
|
Quote:
Originally Posted by Vrodryda
Noid from Dp website is 35$ that's not cheap. Think I could find em cheaper
|
yeah...$35 isnt very cheap for a solenoid. 
http://www.ansgear.com/Planet_Eclips...noidvavgeo.htm
DP noids are probably the least expensive noids out there. |
|
|
|
|
02-09-2013, 09:37 PM
|
#18
|
|
|
Quote:
Originally Posted by Darkh2o
|
Well 35$ ain't cheap to spend when I'm not for sure thts the problem. I'd be better of parting the gun instead of putting 35$ into it? And slg noid r 25$ I lik tht price lol |
|
|
|
|
02-09-2013, 09:40 PM
|
#19
|
|
Fox Battalion II
|
Quote:
Originally Posted by Vrodryda
Well I tried 3 diff battery's all new, and I've serviced the noid. It shot a couple times before I serviced the noid but it wouldn't steady shoot. It would shoot then a shoot a small puff. I serviced the noid and now it wont shoot period. But clicks
|
if it puffs then you need to increase the HPR. but be carefull not to over do it because little adjustment will dramatically increase the pressure. keep increasing the pressure till the gun starts to cycle. |
|
|
|
|
02-09-2013, 09:49 PM
|
#20
|
|
|
Another quick question. I'm not sure if those suffered the same problem as the other G3 but have you looked in the regulator to make sure it's in tact? There's like a little black oring thingie (technical terms here) that sits in the reg seat that used to get crushed by peeps alot. If your reg seat is red, prolly not a problem.
|
|
|
|
|
02-09-2013, 09:50 PM
|
#21
|
|
|
And check the shims to make sure they are in right. The Threshy I just got only had 7 of the 8 that are suppose to be in there and those were in the wrong order. Suppose to look like )()()()(
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
