[BX7ARCHER]

Hi guys sorry to bother you but im not sure where else to turn so here it goes,

I do not have an AXE, I am However saving up to get one. Upon buying this i will play with it and have fun with it, but im looking into the Virtue OLED Board for it, and My question is, Is there anywhere that will paint the window piece the color and finish of my gun ? If there is can someone give me a link to a website or really any information on this. Thanks in advance.

[Eastter]

You don't need oled. There pointless. You can change modes without opening it.

[BX7ARCHER]

more of a personal preference

[kellan]

Get the redline.. it's only like $20 more and wayyyyyy nicer.

[BX7ARCHER]

I have a virtue sponsor

[private_silver]

EDIT: Nvm, was thinking of the redline, just saw the color thing. Gotcha.

Best bet is to either get a black axe. As for color matching, most places that do annos (I'm assuming the door is metal, a quick glance didn't tell me otherwise) will be able to get "close". But think of it like buying a new bumper for your car. Unless it was done at the same time as the rest of the gun, very, very rarely is it the same exact color/finish as the rest. Might not be noticable at a glance but looking at it you'll most likely be able to tell.

[minimag03]

You could probably modify the matching stock door to fit the screen. Some anodizer won't even attempt to match colors unless it's their own work, it's too hard to do and has too high of a chance that a customer would be dissatisfied.

[incognito-z]

The door on a Virtue OLED board for the Mini/Axe is plastic, unfortunately.