[TopRamen]

Im trying to brink and old 2k2 timmy back to life and It has a was board in it (led) Is there any way to tell what version it is with just leds?

I need is 12 bps ramping for this season and I need to know if it can be set to that, it sounds like its set on 15 right now.

If that board cant do 12bps ramping what is the cheapest board i could find that would work in my gun? It has a 2k5 frame on it.

Also, Im having a hard time telling but I think It has an eigenram in it, its very light in comparison to my other ram, is there an easy way to tell?

[gamer565]

Hook a screen up to the board, if it just shows black squares then its a WAS 2.9 If not then it will state the version when it boots up.
Only v2.9 will have low enough adjust cap and any firing mode other then semi auto.

As for the ram, post a picture.

[TopRamen]

Unfortunately I dont have an LCD, I did figure it out though, If you go in to your settings the by holding down the trigger while turning on the gun, only WAS 2.9 will have the last setting Green/orange flashing which is you ROF

posting photo soon for the ram

[TopRamen]

[gamer565]

That's a Eigenram.