Ok, first thing is first...
Turn your LPR inwards till it stops dont go past this, then turn your LPR OUT 4 complete turns
then turn your HPR all the way in, then turn it OUT 4 1/2 turns out
see if that fixes it.. if it doesn't.. then
where is it leaking from? out the backcap? under the frame? etc
A: if its leaking out the backcap take the backcap off and then remove the brass adjuster piece and then replace the black hockey puck looking thing on the adjuster and then replace the 010 oring on the adjuster..
B: if it's leaking under the frame take the frame off and make sure it's not one of the set screws under the frame, i believe it's the middle one that should be loctited..., but first replace the 012 orings on the outside of the LPR