Find fields & stores near you!
Find fields and stores
Zipcode
PbNation News
PbNation News
Community Focus
Community Focus

Reply
 
Thread Tools
Old 02-04-2013, 03:43 PM #1
FCMEDIC
A.Williams
 
FCMEDIC's Avatar
 
Join Date: May 2010
Location: Franklin County, VA
FCMEDIC owns a Planet Eclipse Etek
FCMEDIC has achieved Level 1 in PbNation Pursuit
How to cure bolt stick

Just acquired a 09 slg for cheap, guy says the bolt keeps pinching balls. I took the back part with the Allen key an figured I could push the bolt out with my fingers boy was I wrong. The bolt was so stuck I had to use a sharpie to push it out. Any body else with this problem how did u cure it? I saw one video on YouTube but the kid was polishing the inside of the bolt to cure the stick problem.
__________________
Looking for two players in the 540 area click the link for further detailshttp://www.pbnation.com/showthread.php?t=3957409

http://www.tigerpb.com/
FCMEDIC is offline   Reply With Quote
Old 02-05-2013, 08:13 PM #2
FCMEDIC
A.Williams
 
FCMEDIC's Avatar
 
Join Date: May 2010
Location: Franklin County, VA
FCMEDIC owns a Planet Eclipse Etek
FCMEDIC has achieved Level 1 in PbNation Pursuit
No ones ever had bolt stick I take it???
__________________
Looking for two players in the 540 area click the link for further detailshttp://www.pbnation.com/showthread.php?t=3957409

http://www.tigerpb.com/
FCMEDIC is offline   Reply With Quote
Old 02-06-2013, 12:05 AM #3
bulldogg_pupp
 
 
bulldogg_pupp's Avatar
 
Join Date: Nov 2005
Location: Jackson, OH
bulldogg_pupp owns a Planet Eclipse Ego
bulldogg_pupp has achieved Level 1 in PbNation Pursuit
bulldogg_pupp has perfected Level 1 in PbNation Pursuit
bulldogg_pupp has achieved Level 2 in PbNation Pursuit
Honestly I can say I haven't had an issue with bolt stick out of my 09 but I'm sure it's possible. You should be able to remove the back cap and put your finger in the feedneck and push it out with your finger. I would say to check all of your orings and make sure they are the correct sizes, clean off all of the lube that is on the inside and bolt, and back cap, and relube it with your lube of choice. I use lurker lube and haven't had an issue with it and I personally like it for its slick but sturdy and seems to last a very long time but again it's all personal preference on lube but to each their own. If you do all of that and still have an issue pm me and we can talk more.
__________________
My PBN Feedback +4 -0Old, New +23 -0 to make a combined +27 -0
http://www.pbnation.com/showthread.php?p=22224762

Shockers,Proto Matrix UL'd PM5, Shocker Parts, Halo FS/FT
http://www.pbnation.com/showthread.php?t=3962736
bulldogg_pupp is offline   Reply With Quote
Old 02-06-2013, 01:51 PM #4
FCMEDIC
A.Williams
 
FCMEDIC's Avatar
 
Join Date: May 2010
Location: Franklin County, VA
FCMEDIC owns a Planet Eclipse Etek
FCMEDIC has achieved Level 1 in PbNation Pursuit
I took it apart again the other day and the o ring in the middle of the bolt seemed to be swollen so I replaced it. Lubed it up with the dye grease that came with it. Aired it up today and it shot fine,couldn't shoot too fast all I had was a shake n bake hopper for it for now. I also got bored the other day an tore it down to check out the sear and sear spring. I stretched out the spring just a little just in case while I had it tore down. Seems like my $30.00 investment is gonna make my son a decent first gun.
__________________
Looking for two players in the 540 area click the link for further detailshttp://www.pbnation.com/showthread.php?t=3957409

http://www.tigerpb.com/
FCMEDIC is offline   Reply With Quote
Reply


Thread Tools

Posting Rules
Forum Jump