[johntodd]

i am new to the geo and i aired it up today with a cp reg on it and it shot a few times then it started leaking heavy, so i took it apart to look at it and cleaned the solenoid gasket and when i put it back together it has a small leak. could that be the gasket is blown or could the noid be blown. it does shoot fine, just leaks. thanks

[JTpaintballMC]

Where is the leak coming from?

[Poppy]

First off if your running a cp reg you are going to want to be extremely carful the purge control valve on the geo is in the regulator collar( unlike the geo 2 and up where it is above the regulator in the body. This will allow the gun to fire when being degased weather it's on or off you should really put the stock reg back on. Secondly if it fires and its leaking just try replacing the gasket if your positive its from the noid. Take the frame off the gun and air it up just to check for sure. And again be really careful with that gun with a cp on it

[egogeo]

Probably the solenoid housing, they crack extremely easily.