Originally Posted by jojo750
probably adjusted your trigger too far in, not allowing the microswitch to fully release.
The only other three i can think of are:
The switch arm is bent beside the activation screw and not actually moving.
The trigger is set so that it stops before the switch activates. In other words it's set too short.
You broke the switch somehow.
Pull your grip rame off and try to activate the switch with your finger. See what happens.
ETEK 3LT, with 14" Ti boomstick and cure 3 + bolt F/S
Vanguard creed eyes, membrane, bolt pin, detents F/s[/color]
Old school angel poppets/cup seals, spring detents(not sure which models) F/S