You could possibly design a bolt that puts spin on a ball but it would be nearly impossible to make it stay in a certain direction. Anyways make sure the board is reset and that all the valve and valve keg orings as well as the powertube orings are replaced and fit properly. The valve orings should be very snug. as should the power tube orings when replacing the outer valve keg orings, try putting just the valve keg in the body with the new outer orings to make sure they fit in there pretty snug as well. If everything is sealing properly it doesn't matter how high your dwell is it won't hurt efficiency as the Droid/Clone platform fires off a metered amount of air... and the valve is that physical meter. You could go as far to say as it is a volume regulator and it only recharges when the bolt is returned.
Asylum 502 2013 MSXL D4 RT2 SERIES CHAMPIONS!
3rd Place World Cup 2013 D4 RT2
3rd Place World Standings D4 RT2 2013
"Alright you guys are my ginger crew, you gotta act hard af" - Todd Martinez