[Infinity Kid]

Hey guys! Thanks for viewing my thread!

So, I have 2 pair of Dye I4`s (Blue Cloth/Blue Atlas). On both, when I go to change lens, I push the tab in, then take out the old lens, and put the new one in. Then, when I go to pull the tab back, it doesn`t stay in place, and I can push the lens out through the inside, and the lens will come out!

The tab only stays in the "lock" position with a lens NOT in! Where do you think the problem is going? Is this a common problem with other I4 owners? Let me know whats going on guys!

-Thanks

[BALLSOHARD!]

uhm...from my calculations your screwed

[aresfiend]

Okay, what you have to do is while the tabs are forward, you push them towards the outside (away from where your head would be) as you pull them back. If you look on the clips there's a thing on the outside of each one, that goes in the hole in the lens when it locks back.

If I still had my i4 I'd show a video.

[Infinity Kid]

Ill check it out sir! Appreciate it sir!