[King K-Lin34]

Hey everyone,


I just recently purchased a used Geo2. I went to test it in my back yard and it shoots very consistent 295-300fps, but there is a significant amount of air that vents from the front of the frame each shot. The gun also has a decent amount of kick. I reset the board to all stock settings and cleaned/lubed the gun but there is still a "puff" of air coming from the front of the frame. I was wondering if anybody knew what could be causing this and how to fix it?

Thanks,
KL

[CottonCandyKillerMDK]

sometimes on that it is the solenoid gasket is not sitting right or is to worn and is letting air through

[Farbenstrolch]

http://www.pbnation.com/showthread.php?t=3923035

[dirtraven]

all geo2 does that, the geo3 does the same thing. u get use to it.

[eclipse hunter]

Every eclipse gun does it, take out the screw under the barrle and replace that oring air up the gun and slowly tighten the screw until the air stops leaking imeadiatly stop tightening it or the oring will compress, crack and u will be back to square one

[King K-Lin34]

Great, I wasn't sure if it was normal or not.

Thanks everyone!