The Build Log:
Trying to make the mech valve work with dual bodies.
Had all sorts of issues, changed a million orings, nothin....
Realized I was missing the bolt stops out of the firing cans.... whoops
Put in about 6 hours making the adapter plates
It took a few tries and changes to make the rail work...
Realized a few things.....
1. The material i grabbed was too narrow, needed to be about .375 wider
2. The fittings are offset, and i had to cut the holes in the sides
3. Figured out I could make it much shorter (started with 1", ended with about .500")
Made 4 feednecks, Ion threaded, .875" dia so clamping elbows will fit
Attempted to chrono, was getting about 10fps difference, and major bolt drag with the Lucky Stage 1 Sprung Bolts
Showed it off at Warpaint Indoor Pump Night, got alot of positive feedback and interest
Dan Bonebrake loved it!
Swapped the Lucky Stage 1's for stock ion bolts
Cycles MUCH better, have not chrono'd it
Worked on the Cad model for Rev2, which will be mounted in a Rifle Stock (still need to find one!)
I will try to keep updating this as it goes
And like always.... keep an eye on SSCfb
for more pictures!