[weezyfbby]

After searching on multiple threads and forums to get the right number of clicks with the Virtue redefined board, I saw a whole bunch of different answers...12 clicks, 24 clicks, 60 clicks, dwell at 6, 7, 14, 25, increments of 0.5, 0.25, 1.0 and so on.

Contacted Virtue Directly, that's what they sent me:


NT/DM Redefined Dwell Addendum
The NT/NT11/DM11/DM12 Redefined board fits in a wide array of guns. Because of this the dwell must be adjusted by the user. The dwell value is adjusted in the programming mode with a stock setting of 18ms( or 72 blinks). Below is a chart to give you an average dwell* for your marker. Remember that when setting your dwell (solid red) that the milliseconds is measured in ¼ ms so 4 blinks = 1ms.

Dye NT 7ms 28 Blinks
Dye NT 11 10ms 40 Blinks
Dye DM 11 18ms 72 Blinks
Dye DM 12 18ms 72 Blinks

*You may need to change this setting based on your setup.

I have an NT10 with the upgrade kit, Got my NT working great at 40 clicks!

[ASUmountaineer24]

Had issues with my nt today, thank you this post.

[pbplayer343]

Thanks so much been trying to figure these out

[MaSsAcRe251]

Does this apply to the OLED or just the led board? I would imagine just the led board but I'm just curious.

[Blusylver]

its just the led board, oled is the same as stock

[weezyfbby]

Very happy to know this helped others! This got my NT working awesome. Realized that maximum clicks is 40. My NT starts shooting at around 34 clicks and shoots money at 40!!

And I also believe this is only for non-oled board. Have you guys tried cheater mode? Full auto on first start up...very nice for breakouts haha!

[weezyfbby]

Am I the only one that can't go past 40 clicks? According to Virtue, it should go much further..

[Paint_hore]

40 is max unless they have a new firmware I dont know about.

[weezyfbby]

Originally Posted by Paint_hore

40 is max unless they have a new firmware I dont know about.

Then I don't understand why they say 72 clicks for the DM11-13...I thought it was the same exact board? I was just about thinking of buying a DM11 and putting maybe switching boards..but I think it won't be possible after all

[Paint_hore]

Where does it say that? Maybe they have an update to the boards.

[nor cal cereal killa]

if you want the board in a dm11 and up you'll have to send it in to get flash with the new dm dwell values

[Blusylver]

just buy my dm11 it comes with a virtue oled board in it. plus its sky blu and white.

[weezyfbby]

Did some research and yes it turns out you have to get it shipped to get flashed to be able to use it on a DM...

Thinking of selling my NT anyhow..shoots awesome but I want some change. Anyone want a Nexus NT10, Virtue'd and CF boomstick'd?

[weezyfbby]

@Blusylver - I prefer the lime green Dm11's. Nice guns though, took me a while to realize they weren't the exact same gun hehe.

[shoot2thrill101]

What is the efficiency if the dwell is that high i have my dwell at 22 and the spacer body in my efficiency isnt where i want it like 6 to 8 pods

[Paint_hore]

Why is your dwell on 22?

[shoot2thrill101]

I dunno the gun works ok but a little kick