Originally Posted by gamer565
Have you tried dry cycling the marker after the pressure have been set?
Since you tried different solenoids, that rules out the chance of a bad noid. So that leaves being installed incorrectly.
I am unable to dry cycle the marker since as soon as the solenoid receives air from the LPR it vents off all the air and will not cycle the bolt.
I was able to dye cycle the marq one time, i plugged the leaking vent hole on the solenoid with my finger and enough air was directed to the bolt to make it cycle 10 or so times. I mentioned this in my first post, I think the marq would work fine if i plugged the vent hole on the solenoid. That being said i know thats not the right way to fix the issue.
As for the solenoid installation itself its installed correctly, bob long made it pretty fool proof to install since the solenoid really only fits and mounts one way.