[SilentBall55]

Originally Posted by firefoxx04

because they dont listen to me when i tell them the grease sucks. As stated above, they "reformulated" it with the G5 release.

grease the noid with a good grease. Dow33 is for cavemen. Get a good grease like lurker, techt, violent.

Dow33 is cavemen??? It is an industrial grease made by a Dow Corning sold at all industrial suppliers.

Lurker, TechT, and Violent are home-mixed stuff from some form of industrial grease and oil and branded for paintball use.

[eatafetus]

monkey poo

for christ sake it smells like bananas. you can lick your hands clean after you work on your gun

thats why I see unicorns all the dam time

[GraniteGargoyle]

Dow33 by itself it too sticky. It needs to be thinned a little to be a good paintball grease. That's why the mixes are great.

[GraniteGargoyle]

Originally Posted by eatafetus

monkey poo

for christ sake it smells like bananas. you can lick your hands clean after you work on your gun

thats why I see unicorns all the dam time

This is what I use. I've had the same little tub for a year now. Stuff lasts forever.

[firefoxx04]

Originally Posted by SilentBall55

Dow33 is cavemen??? It is an industrial grease made by a Dow Corning sold at all industrial suppliers.

Lurker, TechT, and Violent are home-mixed stuff from some form of industrial grease and oil and branded for paintball use.

If you think dow33 works as good as the other stuff, you need to go do some research. Just because dow33 is "industry grease" does not make it the superior and best option for a spool valve paintball marker.

[eatafetus]

Ok so it sounds like a stock G4 bolt will work, but can I use a G5 bolt with a G4 PMD?

[marcusgar21]

Yes, only thing bolt wise non compatible is the g5 back cap and the stock g4 bolt in regards to stock parts

[YeloSno]

Why not create a sprung kit for the G series?

Aids in efficiency and smoothness.

Bam, then you can have an end all mid-grade marker.

Just please put in more integral support for the ASA. One screw is ridiculous.

[eatafetus]

Originally Posted by marcusgar21

Yes, only thing bolt wise non compatible is the g5 back cap and the stock g4 bolt in regards to stock parts

So I can use a g4 PMD in my g5 with the G5 bolt.

[marcusgar21]

I ran a g4 backcap in mine with the g5 bolt without issue

[SilentBall55]

Originally Posted by firefoxx04

If you think dow33 works as good as the other stuff, you need to go do some research. Just because dow33 is "industry grease" does not make it the superior and best option for a spool valve paintball marker.

You are right. Maybe a DP spool gun is not for me since it needs specially formulated spool grease. Not even the DP grease works on their own guns.

I used Dow33 on my old Matrix and Shocker and never had a problem how much or how little I put their bolts.

[l1ryan1l]

you can use Dow33 with no issues..it's just specially formulated greases with paintball use in mind work better on all paintball markers than just standard dow33.... it doesnt need specially formulated grease.

[eatafetus]

Originally Posted by marcusgar21

I ran a g4 backcap in mine with the g5 bolt without issue

Ok thanks. Going to buy a PMD!

[AndrewTheWookie]

Originally Posted by YeloSno

Why not create a sprung kit for the G series?

A sprung bolt would definitely be nice. It wouldn't even be that hard to do, just copy the Luxe 2's stock bolt spring, since you can't really do it to the back of the bolt.