[eyekon604]

Nope done think so

[Get_bunkered1]

Originally Posted by Bunkerya4fun

thanks bud. is there an official vapor parts swaping thread? did a search and found nothing.

Sadly, no

[Bunkerya4fun]

are we not supossed to make one? i will if we are allowed

[ProMod]

Originally Posted by Bunkerya4fun

are we not supossed to make one? i will if we are allowed

Go for it.

[juggernaught_lives]

I set one up in a minute. I have the rules already squared for Vanguard I'll use those for the Vapor as well.

First I have to find out if I can make it here or in the "Misc Marker Section"

[Get_bunkered1]

How do we put the new voltage regulator on ??

[Bussey]

How do I set my board to factory settings?

[ProMod]

Originally Posted by Get_bunkered1

How do we put the new voltage regulator on ??

you plug it into the board where the solenoid goes and then plug the solenoid into the other end of the regulator.....

Originally Posted by Bussey

How do I set my board to factory settings?

Originally Posted by zerospeed

Reset Menu - The Reset Menu allows you to individually reset profiles, statistics, or your entire marker to factory defaults. Trigger scroll to the item you want to reset, then pull and hold the trigger. A confirmation screen will then ask you to confirm your choice. Pull and hold again to confirm.

That's right out of the board manual.

[Bussey]

Lol the problem is, is that I just got my beauty and I'm not familiar with how to get to anything, and the Manuel doesn't tell you how to get to the setting it just tells you what they do.

[ProMod]

Originally Posted by Bussey

Lol the problem is, is that I just got my beauty and I'm not familiar with how to get to anything, and the Manuel doesn't tell you how to get to the setting it just tells you what they do.

Oh...It's not safe to go alone, take this:

link to menu-tree

[Get_bunkered1]

Originally Posted by ProMod

you plug it into the board where the solenoid goes and then plug the solenoid into the other end .

ok that's why I thought ! Thanks for the confirmation

[Bussey]

Okkay I'm holding down the trigger and then press the power button to enter the menus and all it does its force fire, like overwriting the eyes. The gun is not hooked to air I was just try to reset all setting, but I can't even get into the board. Also the tourney lock is off, if that helps.

[Dynomatt]

Originally Posted by Bussey

Okkay I'm holding down the trigger and then press the power button to enter the menus and all it does its force fire, like overwriting the eyes. The gun is not hooked to air I was just try to reset all setting, but I can't even get into the board. Also the tourney lock is off, if that helps.

Silly question, but are you doing this with the gun already on? It sounds like the force fire option you have to make the marker shoot through a bad break that's blocking the eyes. Start with the marker off, then hold the trigger, then push the power button while holding the trigger.

[Bussey]

Originally Posted by Dynomatt

Silly question, but are you doing this with the gun already on? It sounds like the force fire option you have to make the marker shoot through a bad break that's blocking the eyes. Start with the marker off, then hold the trigger, then push the power button while holding the trigger.

I feel dumb.

[Dynomatt]

Originally Posted by Bussey

I feel dumb.

I'm assuming all is well now?

[Bussey]

Originally Posted by Dynomatt

I'm assuming all is well now?

Yes. Except for one thing, that I don't understand. If the bolt is back or forward when I air the gun up, it leaks down the barrel, but I can push the bolt back and it seals? I'm using the v3 can and pooty bolt.

[Get_bunkered1]

So pissed...... Vapor sucked complete dick today as soon as I aired up the gun everything seemed good then after half a pod at the chrono range gun basically exploded and started leaking everywhere.... I narrowed the leak down to where the barrel threads In and the bolt stays in the forward position. Would I be able to send it you and have you install the v3 parts correcy and tune it for me promod ? Thanks

[dgusa]

Originally Posted by Get_bunkered1

So pissed...... Vapor sucked complete dick today as soon as I aired up the gun everything seemed good then after half a pod at the chrono range gun basically exploded and started leaking everywhere.... I narrowed the leak down to where the barrel threads In and the bolt stays in the forward position. Would I be able to send it you and have you install the v3 parts correcy and tune it for me promod ? Thanks

Is the front breach oring still there? Or did it blow out of the gun?

[Get_bunkered1]

Originally Posted by dgusa

Is the front breach oring still there? Or did it blow out of the gun?

That's the wierd thing all the oring are intact.. I cleaned rebuilt and relubed te entire engine 2 different times, the first I use the v2 can and 2nd time I used the v3 can same problem both times

[dgusa]

Originally Posted by Get_bunkered1

That's the wierd thing all the oring are intact.. I cleaned rebuilt and relubed te entire engine 2 different times, the first I use the v2 can and 2nd time I used the v3 can same problem both times

If you put a buno back in the front breach does it still leak?

[ProMod]

Originally Posted by dgusa

If you put a buno back in the front breach does it still leak?

what's your tank pressure? someone had the same complain and they were running a 600 PSI tank; it blew past the HPR and caused the noid to safety vent. PM me.