[emast78]

I got a cure 4 bolt for my etek 3 lt and had no issues with it the first time I shot it in my back yard but brought it out to practice and Lent the gun to someone but when they went to shoot it the balls weren't going more than a few feet. What would cause this change and how can I fix it?

[Mason74]

Originally Posted by emast78

I got a cure 4 bolt for my etek 3 lt and had no issues with it the first time I shot it in my back yard but brought it out to practice and Lent the gun to someone but when they went to shoot it the balls weren't going more than a few feet. What would cause this change and how can I fix it?

Turn up the pressure on ur reg. My guess is something might be screwed there, unless your dwell is off. Check dwell and make sure it is set at least at 8 ms, which is stock, if I am not mistaken. I run mine at 9.5 on an etek 4.

If the dwell is fine, try the reg. see if that helps.

[emast78]

I've changed the dwell and that hasn't helped ill check the reg thanks

[usaf_mech]

Check/re-lube the reg and rammer. Also make sure the bolt pin is properly seated. I've seen this same issue several times and its been the bolt pin.

[emast78]

Ok thanks!

[usaf_mech]

fixed?

[emast78]

Yeah thanks!