Find fields & stores near you!
Find fields and stores
PbNation News
PbNation News
Community Focus
Community Focus

Thread Tools
Old 01-17-2013, 11:44 PM #1
Join Date: Jan 2013
Question Electric Autococker three way leak

Need help! Have a 2003 Shocktech Autococker w/an e grip & have a bad leak in the three way/noid. Have tried everything I can think of but can't figure it out. Heres a link to a video of the gun: If anyone knows how this can be fixed please help me out!!
hone247 is offline   Reply With Quote
Old Sponsored Links Remove Advertisement
Old 01-18-2013, 05:21 PM #2
cruciatus111's Avatar
Join Date: Mar 2009
Location: Honolulu, Hawaii
cruciatus111 is playing at Living Legends V
cruciatus111 is for the Gunfight
cruciatus111 has achieved Level 2 in PbNation Pursuit
cruciatus111 is attending Decay of Nations VI
Where exactly is the leak coming from? Is it by the barbs or from the solenoid? If its from the barbs it could be as simple as some old cracked hoses that need replacing. If its from the solenoid then you probably need to re-seat the gasket, remove the 2 screws holding the solenoid to the manifold and put some dow33 on the gasket and make sure it's not cracked, and then reinstall it
808 all day every day
Pump guns are fun guns
WGP Jeff Orr Blackout #41/60
cruciatus111 is offline   Reply With Quote
Old 01-18-2013, 11:06 PM #3
HolySokz's Avatar
Join Date: Jun 2004
Location: cincinnati
 has been a member for 10 years
HolySokz supports DLX Technology
HolySokz supports Ninja Paintball
HolySokz supports Empire
You might have dirt in the housing, make sure you screw it in snuggly and if you haven't you could take the noid apart and give it a good clean and lube.
HolySokz is offline   Reply With Quote

Thread Tools

Posting Rules
Forum Jump