[Boged17]

Hello all, I have my 03 excal completely in pieces, except for the three air passage(?) screws in the back, and one other on the body. These guys do not want to come undone, and my question is 1) do they need to and if so 2) how the hell do I accomplish this. I have already spiraled two Allen wrenches, so I'm thinking there is something special, if they need to come out. Thanks for looking!

-Scott

[fsrxc1]

They are lock tighted in....yes tehy need to come out...a little heat should help...a little heat not a lot

[Boged17]

Should I use boiling water? Soldering iron to heat the tip of the screw? Thanks for the response btw =)

[Brandon85]

a hot air gun works fine for that