[ZzBrutality]

So my Demon is having its fair share of issues. It's getting crazy bolt stick no matter what and it has a leak down the barrel. I've tried everything and I'm just getting myself more frustrated. Anyone know what could be wrong?

[PbNation79]

Originally Posted by ZzBrutality

So my Demon is having its fair share of issues. It's getting crazy bolt stick no matter what and it has a leak down the barrel. I've tried everything and I'm just getting myself more frustrated. Anyone know what could be wrong?

either your orings are too swelled up or your breech can has too much crude in it. you need to clean the whole can, use slick honey or vaseline for lube and let us know how it went. please, lube it very light.

[Reaper (ACI)]

Replace the 011 bolt guide tip o-ring. That's the one that causes leaks down the barrel.

[JUGGERNAUT69]

Originally Posted by Reaper (ACI)

Replace the 011 bolt guide tip o-ring. That's the one that causes leaks down the barrel.

Hey Reaper with what size?

[ZzBrutality]

Originally Posted by Reaper (ACI)

Replace the 011 bolt guide tip o-ring. That's the one that causes leaks down the barrel.

Replaced it. Didn't do anything, it still leaks.

[Reactor]

Confirming that it was the o ring within the can guide not the tip of the bolt. I leaked down the face of the bolt prior to replacement and the issue was resolved upon replacement. I check to see if air is coming out of the face of the bolt sometimes to confirm the leak and this o-ring is usually the case. (careful not to pull the trigger while air is engaged and finger is inserted)

[Reaper (ACI)]

Reactor is talking about the 019 forward shut off o-ring. That one will cause the leak as he described on the bolt face.

[juggernaught_lives]

Check the 017 oring forward bolt can and the 011 Bolt Guide tip. Even if you see nothing wrong with the orings you should still replace them.