Find fields & stores near you!
Find fields and stores
Zipcode
PbNation News
PbNation News
Community Focus
Community Focus

Reply
 
Thread Tools
Old 01-08-2013, 04:20 PM #1
Boged17
 
 
Join Date: Aug 2012
Where to screw in 04 excal lpr gauge

Got my excal tool kit the other day and I finally had time to sit down and try to use it, when I realized I only ever used a tool kit on my old Vikings and I remember the procedure being different, but now how. Woops lol, so a locations in laymens terms would be appreciated, such as left back tube, right back tube, left front tube, etc. I looked, searched, and knew that this was a no brainer to most people on this forum, so I figured I would ask. Thanks for taking the time to look!
Boged17 is offline   Reply With Quote
Old Sponsored Links Remove Advertisement
Advertisement
Old 01-08-2013, 04:49 PM #2
MeuroM
 
 
MeuroM's Avatar
 
Join Date: Aug 2007
Location: Underground
Back left, replaces the hammer cargridge.
__________________
I Make / For Sale:
-Viking/EvilM bolts
-EvilM LPR gauge tool


I am MorueM / Untouched Excal / Resurrected Swirl / Halfmill Retouched / The Family
MeuroM is offline   Reply With Quote
Old 01-08-2013, 06:01 PM #3
Boged17
 
 
Join Date: Aug 2012
Thank you for the help! However, testing the lpr, and the hpr, has revealed they are running at 72 psi and 200 psi respectively, and my excal will not shoot more than 50 feet. The gun was shooting fine, then I bought myself an ebisu board for christmas, and the excal seems to dislike change as much as I do. I am just using the stock settings, with the 'mode' set to excal eyes on. Any ideas on what to start playing with first? Or does this sound like something other than a board issue? Again any help is appreciated!
Boged17 is offline   Reply With Quote
Old 01-08-2013, 06:09 PM #4
fsrxc1
 
 
fsrxc1's Avatar
 
Join Date: May 2004
Location: mass
 has been a member for 10 years
What year excal is it...what is your dwell...sounds like a board issue
__________________
www.destructivecustoms.com
For all your AKA service and milling needs. Fully Authorized in the repair of Viking, Excalibur, and Merlin Markers.
mark@destructivecustoms.com

Rampage X-Ball
Monster Paintball- I Bleed GREEN
fsrxc1 is offline   Reply With Quote
Old 01-08-2013, 06:19 PM #5
Boged17
 
 
Join Date: Aug 2012
2004, I think the stock dwell is set at 10, I've heard to bump it up near 12 or more. I tried 12 before I ordered the tool kit to check it out, and it still had fairly severe shoot down issues, but the first ball shot at around what I wanted it to.
Boged17 is offline   Reply With Quote
Old 01-08-2013, 11:52 PM #6
yuik
Mr Diet Coke on the Rocks
 
yuik's Avatar
 
Join Date: Dec 2004
Annual Supporting Member
yuik is playing at Living Legends V
yuik is playing at Living Legends VI
yuik is an NCPA player
yuik plays in the APPA D4 division
yuik is one of the top 250 posters on PbNation
yuik is Legendary
how are your detents, what size bore you using did you put new battery in
__________________
if you have an ebay account and want to make 3$ in paypal for 5 min of your time pm me!
Closed Bolt Ballers!

Huge gearbag sale. Everything you can imagine including bob saget!

RED JMJ Smooth Mill viking RobTown Valve Ultralight Frame!
yuik is offline   Reply With Quote
Old 01-09-2013, 08:28 AM #7
TheePsycho
Sadist
 
TheePsycho's Avatar
 
Join Date: Jun 2003
Location: Mukwonago, WI
TheePsycho is a Supporting Member
 has been a member for 10 years
TheePsycho is playing at Living Legends VII
How is your battery? You could using your previous board again and make sure that still makes it fire.
__________________
Evil Ehm
TheePsycho is online now   Reply With Quote
Old 01-09-2013, 12:05 PM #8
Boged17
 
 
Join Date: Aug 2012
Just bought new batteries, they shouldn't be the problem. Paint/barrel match was actually very good, a .684 back with paint that was snug and took a big breath from me in the blow test to get it to dislodge. I haven't checked the detents, but, the time elapsed between the gun shooting fine and the board being installed (less than a week) I don't think they have gone bad. I can definitely check though.
Boged17 is offline   Reply With Quote
Old 01-09-2013, 12:45 PM #9
TheePsycho
Sadist
 
TheePsycho's Avatar
 
Join Date: Jun 2003
Location: Mukwonago, WI
TheePsycho is a Supporting Member
 has been a member for 10 years
TheePsycho is playing at Living Legends VII
I would try the previous board and see if it still fires, if so then I would talk to will at Tadao. It also is possible that the wires to the board could be loose, check your connections.
__________________
Evil Ehm
TheePsycho is online now   Reply With Quote
Reply


Thread Tools

Posting Rules
Forum Jump