[dck1995]

I have an Invert Mini that i used to use as a backup gun. It has been sitting for about a year. I went to shoot it today and it wont fire. I turn it on and the light blinks green and eventually turns to orange/red blinking. I changed the battery twice and still the same issue. No solenoid clicking or firing. I have tried everything. What could it be?

[wurthit4660]

what brand battery? dont use cheap azz ones only duracell/energizer.. if not that then sounds like a board issue.....

[minimag03]

It could be a short in the board if it's not the battery itself.

Do you remember if you cleaned the upper board/eyes before you stored it? There could be a lot of old paint on the board causing problems. Also make sure the solenoid is still plugged into the board and that the wires are in good shape.

[dck1995]

, it might be a short( i cleaned it ut planned on using it more so i didnt take it all apart). And Im using a kangaroo battery so that might be my problem

[minimag03]

Originally Posted by dck1995

And Im using a kangaroo battery so that might be my problem

Yep, that'll do it.

[dck1995]

Changed battery still not shooting, it seems to me that the trigger isnt registering

[minimag03]

Adjust the screw on the top of the trigger closest to the front.

[minimag03]

Have you even tried cleaning it and checking the noid like I mentioned?

[dck1995]

I will check the noid tonight. I adjusted the trigger and still nothing. I called invert nd they said they will send me a new eye board for free and that that might be the problem

[minimag03]

Have you tried taking it out and seeing if it's dirty? The one you have just might need a cleaning.

[WatchDragon]

If its an older mini, the Microscopic magnet that is above the board might have came loose.

[dck1995]

Magnet? All I know about is the magnet over the trigger. And its a V2 I believe.

[minimag03]

There is a magnet above the board I was telling to check out/clean. If it came off the body then the HES sensor has to magnetic field to detect.

[dck1995]

So far checked the board, trigger, battery, and solenoid and none of them have been the problem. 5-7 Ill have a new eye board from Invert for freeeeee

[dck1995]

How do I get to this magnet? haha

[dck1995]

Took the board out, hes magnet on screw is there and clean

[dck1995]

sure let me try toothpaste... wtf... but it seems like the trigger isnt even registering right now. The eyes are working

[WatchDragon]

Here is the magnet, i think it is 1/32" or 1/64" inch in size. it is that TINY silver disc in the picture (not the entire red square, lol)

When it is installed (AKA Super Glued in) it needs to repell the trigger magnet.

[Tenit]

Originally Posted by EmpireGunTech

Put a dab of toothpaste on the solenoid. Works magic.

Seriously?

[dck1995]

Mine still seems to be glued in fine

[minimag03]

Originally Posted by EmpireGunTech

Put a dab of toothpaste on the solenoid. Works magic.

Who are you? I doubt you're an Empire tech since you're posting after business hours. It looks like you're trying to sabotage peoples guns by telling them to put toothpaste in them.