DM12 Virtue Board

Tiga88 · 01-05-2013, 11:06 PM

The tech at my local field told me I could charge my virtue board with a usb hookup. I have a ton of them but when I plug one in the lights next to
"Red-Charging
Green-Charged" just flashes really quick and then it just sits there. I don't know whether or not it's charging or if its just sitting there and why it's doing that

**Entropy** · 01-06-2013, 10:35 AM

Your thech is misstaken. This is only possible with some Tadao boards. That port is just forcharging.

trouble5om · 01-06-2013, 10:59 AM

I think your board is the same as the one on my DM11. You have to move the battery cables to the connectors at the bottom of the board marked CHARGER. Then it will charge.

nor cal cereal killa · 01-06-2013, 02:14 PM

Quote:

Originally Posted by trouble5om

I think your board is the same as the one on my DM11. You have to move the battery cables to the connectors at the bottom of the board marked CHARGER. Then it will charge.

This

Bowen · 01-06-2013, 02:21 PM

I have the DM11 oled virtue board you must plug the batteries into the charging posts to charge it, do you have a manual that would help.

Tiga88 · 01-07-2013, 02:12 PM

Quote:

Originally Posted by trouble5om

I think your board is the same as the one on my DM11. You have to move the battery cables to the connectors at the bottom of the board marked CHARGER. Then it will charge.

Hey thanks a lot guys!