Find fields & stores near you!
Find fields and stores
Zipcode
PbNation News
PbNation News
Community Focus
Community Focus

Reply
 
Thread Tools
Old 12-30-2012, 03:25 AM #1
BiggySam03
DaYTONa bEacH
 
BiggySam03's Avatar
 
Join Date: Sep 2004
Location: florida
 has been a member for 10 years
nt 11!! 330 fps

So I have my nt set to stock settings 125 psi 9 dwell and green insert. Its shooting at 330 with stock settings and when I go to lower the reg it just stops shooting at about 115 psi and at 120 psi it is still shooting 315 has anyone had the same problem or any ideas to help ke out.
BiggySam03 is offline   Reply With Quote
Old Sponsored Links Remove Advertisement
Advertisement
Old 12-30-2012, 10:47 AM #2
speedy2k4
BSH University
 
speedy2k4's Avatar
 
Join Date: Jul 2005
Location: MD
speedy2k4 is a Supporting Member
Add spacers.
speedy2k4 is offline   Reply With Quote
Old 12-31-2012, 03:29 PM #3
sku01
 
 
sku01's Avatar
 
Join Date: Apr 2009
Location: City of Angels, CA
Annual Supporting Member
Happened to me before. Bolt sail and plunger orings needed to be changed to add more resistance. In my experience, the NT bolt system likes tighter fitting orings. Try this and see if it works. Hope it helps.
__________________
sku01 is offline   Reply With Quote
Old 01-01-2013, 02:33 PM #4
EAGLES83
Headshot Hotshot
 
EAGLES83's Avatar
 
Join Date: Mar 2008
Location: Victoria, texas
Annual Supporting Member
EAGLES83 is Legendary
I just started noticing this. The manual and dye techs both say the nt11 needs to operate at 120-150psi, which I obtain by green insert, green spacer and operating perssure at 125. However I know that for the longest time I used just the green tip insert with no spacers operating at near 105. I dont know how to fix it back. Ive changed all the orings with no luck. I would have thought that the orings would have broken in but doesn't seem like the case for me. However there is a notable increase in sound and the shot is a bit harder too.
__________________
MVP ALLSTARS
EAGLES83 is offline   Reply With Quote
Old 01-04-2013, 10:18 AM #5
tacodorifto
 
 
tacodorifto's Avatar
 
Join Date: Sep 2010
Keep it the psi at 120/125 & Add the small spacer. It should drop your fps. You could also use the blue bolt flow insert. Try one or the other to see which works for you.
tacodorifto is offline   Reply With Quote
Reply


Thread Tools

Posting Rules
Forum Jump