[dwil4730]

so i had tap one of my eye cover screws for my closer, would anyone happen to know off the top of their head what size they are and a good place to order them?

[gamer565]

If you tapped it, then you should know considering you used a tap that says the exact size on it...

You can get the screws at a local hardware store.

[XiledHawaii]

2-56x5/16" is the exact size. hardware stores dont normally carry 5/16" though, but they carry 1/4" and 1/2" instead. 1/2" is a little too long, and 1/4" is a tiny bit shorter but works just as well. the screws normally range between 10 and 20 cents each. the nice thing is that you can replace the flathead stock ones w/ phillip-head screws so that you only need 1 screwdriver for both your eyes and eye covers

edit: that's as long as the closer has the same eye screws as the rapper