[GhillieSuitPaintball]

Hey guys, got a problem with my V2 Prophecy I just picked up in a local deal. I've stripped it down and put it back together probably 10 times and it still isn't working. I have 2 sets of internals but the original one for this shell kit has a broken battery harness. Is there any way to exchange the 2 harnesses without swapping the motor itself? The shell kit seems to not want to snap together but I've double and triple checked the assembly of it and everything seems fine. It will turn on and spin, and it will spin for a bit when you knock on the shell.

However, when loaded with paint it refuses to feed. I've taken it down ad far as I feel comfortable and still nothing.

Thanks in advance fellas, Benny

EDIT: Really shoulda put this in the Prophecy thread, my apologies.

[monty97]

Are you testing the V2 while its on a gun or off the gun and filled with paint? With it filled up with paint it may not be hearing the the noise from your knock on the shell. Try loading the hopper and setting it beside a gun, fire the gun and see if it feeds then. You may just need to adjust your sound settings.

[GhillieSuitPaintball]

Adjusted sound settings to 6 for testing long ago, still nothing.

[ccluff2]

check the magnets in the clutch. if the tension is not high enough it will constantly slip when fully loaded with paint.

see if the hopper feeds with just a few balls in the catch cup.