 |
12-27-2012, 07:55 PM
|
#1
|
|
Join Date: Jul 2005
Location: Long Island, New York
|
Pm8 Hyper 3 leak
Trying to fix my buddys PM8. I've reset everything to stock settings ( LPR, dwell, etc.) When I air the gun it leaks through the Hyper 3 through the small hole on the Hyper 3. Also the bolt moves when you air it also and makes a pop. Any insight would be great.
Only things I have done was reset to factory settings and I replaced the o-ring on the brass part of the Hyper 3 and the LPR.
__________________
Long Island Pandemic
Rescue Hook & Ladder #1
eBay Feedback 61-0-0 100%
Proto Pm5
|
|
|
|
12-27-2012, 10:18 PM
|
#2
|
|
Join Date: Dec 2012
Location: Charlotte, NC
|
Quote:
Originally Posted by philly101
Trying to fix my buddys PM8. I've reset everything to stock settings ( LPR, dwell, etc.) When I air the gun it leaks through the Hyper 3 through the small hole on the Hyper 3. Also the bolt moves when you air it also and makes a pop. Any insight would be great.
Only things I have done was reset to factory settings and I replaced the o-ring on the brass part of the Hyper 3 and the LPR.
|
Replace 007 o-ring in reg, 015 o-ring on piston. |
|
|
|
|
12-28-2012, 08:06 AM
|
#3
|
|
Join Date: Dec 2012
Location: Charlotte, NC
|
Quote:
Originally Posted by philly101
Trying to fix my buddys PM8. I've reset everything to stock settings ( LPR, dwell, etc.) When I air the gun it leaks through the Hyper 3 through the small hole on the Hyper 3. Also the bolt moves when you air it also and makes a pop. Any insight would be great.
Only things I have done was reset to factory settings and I replaced the o-ring on the brass part of the Hyper 3 and the LPR.
|
Forgot to ask, when u say the bolt moves, do u mean it stays in the forward position when u gas up he gun? |
|
|
|
|
12-28-2012, 09:27 AM
|
#4
|
|
Join Date: Aug 2012
Location: Waco, TX
|
If the bolt moves forward it means the lpr is set to low, my pm8 leaks when i have the lpr set real low. Try turning the lpr up, how many turns out is it?
Also you do know that the manual has the incorrect order for the lpr shims right? Has them backwards, this could cause leaks as well.
__________________
Comanche Badlandz Paintball
I would NOT recommend this field to anyone, message me if you have any questions
~Friction~ Texas Storm G6R - Red/Blk Protege - V2 MacDev Clone - 2K WGP cocker Bob Long= King of Poppets - MacDev= King of Spoolies
Sponsors: SlaughterHouse Tattoos Message me for DISCOUNTS!!! Killeen, TX
Last edited by JoshC90 : 12-28-2012 at 05:55 PM.
|
|
|
|
|
12-28-2012, 11:57 AM
|
#5
|
|
BSH University
Join Date: Jul 2005
Location: MD
|
Quote:
Originally Posted by Mason74
Replace 007 o-ring in reg, 015 o-ring on piston.
|
 |
|
|
|
|
12-29-2012, 08:15 PM
|
#6
|
|
Join Date: Dec 2012
Location: Charlotte, NC
|
Quote:
Originally Posted by philly101
Trying to fix my buddys PM8. I've reset everything to stock settings ( LPR, dwell, etc.) When I air the gun it leaks through the Hyper 3 through the small hole on the Hyper 3. Also the bolt moves when you air it also and makes a pop. Any insight would be great.
Only things I have done was reset to factory settings and I replaced the o-ring on the brass part of the Hyper 3 and the LPR.
|
If u want to know how to replace the 007 oring, there is a thread I started on the dye matrix side. Got my answer from another guy, since I was working in my reg. |
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
