Find fields & stores near you!
Find fields and stores
Zipcode
PbNation News
PbNation News
Community Focus
Community Focus

Reply
 
Thread Tools
Old 12-15-2012, 06:04 PM #1
Megadestructo
Pixel Pusher
 
Megadestructo's Avatar
 
Join Date: Mar 2006
Location: SoCal
Annual Supporting Member
Megadestructo plays in the PSP
Megadestructo plays in the APPA D4 division
Megadestructo is Boss
G6r trigger won't stop bouncing, any advice?

Hey everyone,

I recently upgraded to a nice 2k12 G6r (from my lovely 2k11 G6r). It SHOOTS fantastically - smooth, efficient, quiet - but I took it out to play with twice and in the middle of a rope it takes off on its own: finger off the trigger and it keeps shooting.

I've tried it in PSP 3-shot ramp (12bps), capped, and uncapped semi. It's the stock trigger, with the spring installed as well. I've done default settings and today I tried maxing out Mech. debounce and regular debounce as well as playing with the trigger-filter setting. I even backed the activation screw so that the trigger needs to be pulled almost completely before it hits the microswitch.

I'm kind of at a loss at what to do.

Here is the rest of my information:

2k12 G6r
- Premium bolt
- LP poppit
- Ninja SLP reg
- Frenzy 5.0 (I don't think you can change that yet anyway)
- sweet-spotted via Lurker methods

Any help would be fantastic. Thanks!
__________________
OLD - +32/-0, NEW +94/-0 - TOTAL +126
Megadestructo is offline   Reply With Quote
Old Sponsored Links Remove Advertisement
Advertisement
Old 12-15-2012, 07:23 PM #2
Tabris17
Will B/S/T Souls
 
Tabris17's Avatar
 
Join Date: Jan 2006
Location: Connecticut
Annual Supporting Member
Tabris17 is a Moderator
Tabris17 is BST Legit
Tabris17 supports our troops
Tabris17 is one of the top 250 posters on PbNation
Tabris17 is Boss
Tabris17 is attending Decay of Nations VII
Try stretching the spring out to get some more tension.
__________________
Owner of the Silent Hill Cyborg... the most evil marker in paintball.
KGB MOB

"Only the foolish believe suffering is just wages for being different. Only the savage regard the endurance of pain as the measure of worth. Only the insane equate pain with success."

PBR Feedback +26/-0 PBN Feedback +16/-0 IOG Feedback +10/-0
Tabris17 is offline   Reply With Quote
Old 01-04-2013, 02:55 PM #3
kounterclokwise
Thaddeus Bach
 
kounterclokwise's Avatar
 
Join Date: Oct 2004
Location: atl
hey, i was just reading the manual for the g6r. it says that if it is bouncey, set the activation point closer to the rear of the pull. hope that helps.
__________________
GEARbagSALE

WTB: Black Dye AirPort
WTB: NXT EyeCovers/Detents
kounterclokwise is offline   Reply With Quote
Old 01-04-2013, 04:49 PM #4
gamer565
Place ran by hypocrites
 
gamer565's Avatar
 
Join Date: Dec 2005
Location: OK
Annual Supporting Member
gamer565 is playing at Living Legends VI
gamer565 is playing at Living Legends VII
gamer565 posts videos on PbNation
gamer565 is reppin' sidebar 4 life
gamer565 has achieved Level 6 in PbNation Pursuit
gamer565 is one of the top 100 posters on PbNation
gamer565 is Boss
You could bend the metal tab slightly on the switch to help with bounce.
__________________
Jolly Green (╯□)╯︵ ┻━┻

gamer565 is offline   Reply With Quote
Old 01-07-2013, 01:51 PM #5
cguncapped
 
 
Join Date: Jan 2013
All you have to do is adjust the smaller top screw on the trigger to create a longer trigger pull. Might need to adjust the bottom one to keep it from bottoming out so you can get the proper trigger pull length. This problem happens when the trigger pull is to short and the actual cycling of the gun creates enough kick to pull the trigger a second time and so on,when it does that you can just push forward on the trigger and it will stop. Really hope this helps should be a quick fix...
cguncapped is offline   Reply With Quote
Reply


Thread Tools

Posting Rules
Forum Jump