[nabisco_12]

on my Rt with a level x is short stroking a lot, that turned in to the bolt not returning back all the way...

[warchild69]

Try a new bolt spring

[nabisco_12]

any AGD spring?

[warchild69]

Any level 10 spring, just as a check to see if that is the culprit.

[nabisco_12]

Crap all I gave is rt springs
... no good?

[warchild69]

They should be the same, this is just a troubleshooting start, it could be something else, so try a spring that extends past the end of your bolt, hopefully that's your issue. If not it could be a power tube o ring/carrier issue too.

[nabisco_12]

here is a video and this is with a new spring


http://imageshack.us/clip/my-videos/...xccbijqoa.mp4/

[DMex]

Retune your lvl 10, more then likely you have bolt stick.

It could also be a weak bolt spring though. If you don't have another, you can stretch the spring you have for troubleshooting but it'll eventually start happening again.

You could also be tripping the lvl 10 with your detent which is then not resting correctly. To fix that you'll need to add shims to the lvl 10 and or readjust your detents with orings.

I would start with retuning the bolt first with a fresh gold spring then ck your detents.

Also make sure your frame and thumb screws aren't wrenched down too tight.

[nabisco_12]

yeah i tried a new spring like u said to do.... i have to get new shims due to my little man taking off wit them lol

Originally Posted by DMex

Retune your lvl 10, more then likely you have bolt stick.

It could also be a weak bolt spring though. If you don't have another, you can stretch the spring you have for troubleshooting but it'll eventually start happening again.

You could also be tripping the lvl 10 with your detent which is then not resting correctly. To fix that you'll need to add shims to the lvl 10 and or readjust your detents with orings.

I would start with retuning the bolt first with a fresh gold spring then ck your detents.

Also make sure your frame and thumb screws aren't wrenched down too tight.

[nabisco_12]

i have retune the level x, it only has 2 or the little shims but it was all right, correct everything, i tried different springs,turned in the velocity and it was working okish, sometimes i could hear a leak in the barrel. put it just doesnt rip like it should. i remember this marker shooting massive strings. and it had the level ten in last when i played it year ago.... could it be the y grip? i always ran a 45 single trigger frame...but that still doesnt tell me why it leaks from time to time now while cycling? it has oil in it i made sure but its just not where it should be. not i was always told under 1k i lose the rt effect and played many times like this( long games)andit never short stroked like this before!?