Any way to tell if old virtue board is for sft or nxt?

pleasedon'tbanme · 05-05-2013, 03:31 PM

Hello fellow shocker owners! I have found a virtue shocker board that I bought about 4 years ago. I am not sure if it was the nxt version and would be compatible with an nxt that I have. Is there any way besides sending it into virtue that I can find out if it has the nxt break beam eye recognition? I searched and didn't find anything. Thanks for any help!

Even if I just put it into my nxt I wouldn't really know if the break beam eyes work with the board.

Eagledsm · 05-05-2013, 04:14 PM

Easiest way would be to cycle it through all the mode colors and find the manual that corresponds with that sequence.

Whitie22 · 05-05-2013, 04:15 PM

The board would have a setting for break beam eyes. Just read the manual and see if it has the setting.

pleasedon'tbanme · 05-05-2013, 04:40 PM

Great idea that I didn't think of, but I am pretty sure my manual was lost while at the field. I will search all of my gearbags incase its there but I doubt I still have it. I have the box but it doesn't hint which version it is.

jim4130 · 05-05-2013, 07:18 PM

The manuals are online at virtuepaintball.com

pleasedon'tbanme · 05-05-2013, 07:42 PM

YES!!!! VICTORY found this on their website
"If you are using a Virtue LED board then turn the board on. If the LED is solid red or blue then you have the older software. If the LED is blinking red or blue then it has the new Redefined software."

The light on the board was blinking blue so its a refined board. I now just need to find how to select the nxt breakbeam eyes and not reflective

Apollo918 · 05-06-2013, 08:15 AM

It's the yellow one. Setting #2 for NXT.