[middle_man]

The set screw for my LPR is all the way in and I only have 75psi. The velocity is still dead on.

Also, the gun is loud and has lots of kick.

Engine was lubed, botg regs were cleaned and lubed also.

[IgnoranceInABag]

have you tried a different tester?

[middle_man]

Should have stated in the original post.

YES, I tried a friends pressure tester. Aswell I rebuilt mine with new guages, definatly at 75.

[gamer565]

Lpr doesn't effect how loud the marker is, the hpr does.

Have you sweet spotted your regs?

Also make sure your board settings are at default.

[middle_man]

Previously sweet spotted at 80/205. Unable to reach the 80.

HPR I start at 200 and adjust based on velocity.

[firefoxx04]

what gun is this happening to?

is dwell at 6-8ms?

[IgnoranceInABag]

did this just start happening after cleaning the regs?

[middle_man]

It is a victory v2. Dwell is 6ms.

Yes, it did start after rebuilding the regs. However I have rebuild the regs plenty of times before with no such problems. Also, since then ive rebuilt them a second time with no success.

[grossmeisterbe]

Some shims missing in the hpr after rebuilding?