[Gabfaf]

hi guys, i'm doing a shego right now but i need somes helps.

I read that DM eyes gonna work with ego board and body. Actually, i only have one slot for a eyes because sft have reflective eye. My question is... do i need both eyes? if no, which one do i pick (red or white)? if yes, it mean i have to do a second slot for eye (like breakbeam eye)?

second question, i'm using shocker noid and i read you have to unweld the upper board but i force it and both pin goes off the noid. Am i fine if i put them back or i broke the noid?

i'll post pics later during my project. Thanks for answer

[MR.FISH]

im in the same situation you are and from what i have read you will need to have your body milled to use break beam eyes...never thought of using DM eyes...
speedcustoms used to do eye milling and sold a special harness for them

[Gabfaf]

get the body milled isnt a problem.. i have acces to tools

[MR.FISH]

http://www.pbnation.com/showthread.php?t=3877712

[inmylife2415]

Your going to mill this yourself? If so you will need to mill for BB eyes, and mill out the frame if your going to use your shocker noid. What noid do you have?

[d-r0ck-1489]

Originally Posted by Gabfaf

second question, i'm using shocker noid and i read you have to unweld the upper board but i force it and both pin goes off the noid. Am i fine if i put them back or i broke the noid?

i'll post pics later during my project. Thanks for answer

That noid may be toast You need to de-solder the board from the noid. The pins should not come out.

[Gabfaf]

the pin goes off when i force it but i pin it back on... do you think it will still work?

[inmylife2415]

What noid, parker or hump?

[Gabfaf]

look like a parker noid

[Box]

If you broke the leads off of a Parker solenoid, its done unless you can solder a connection to the remaining stump of it and get it to test fire.

[Gabfaf]

i put thos 2 pins back on noid and it seems to be back on place... ill try it when my project gonna be done.

[Gabfaf]

i'm actually working on making a left sft cover. It could be easier to put nxt eye cover on it but i feel i could do something more original.

[cs900]

hate to break it to you, but mirror eye covers on BB'd SFTs isn't original

[Gabfaf]

Originally Posted by cs900

hate to break it to you, but mirror eye covers on BB'd SFTs isn't original

it's ok, i'll not be original then

[Gabfaf]

a little update of whats coming...

[Apollo918]

i saw those frames going for cheap. glad someone snagged one for a shego.

[Gabfaf]

i have a aurora tip for a shaft barrel too but i don'T know if ill be able to convert it for a freak back.

[Box]

Originally Posted by Apollo918

i saw those frames going for cheap. glad someone snagged one for a shego.

I have one for a shego, I believe jim does as well.

If you want the back of the frame to fit flush to the back of the body, you will run into problems.

[americanidiot748]

i've thought about snagging one of those frames for my orange SFT so i can Shego it but i'm gonna wait and see how i like my other Shego first

[Gabfaf]

i got a sl66 board for free. so ill begin the wiring as soon as the frame will be done. i would like to use a screen but i don't know if i wanna mill the back of the frame.

[Gabfaf]

Originally Posted by Box

If you want the back of the frame to fit flush to the back of the body, you will run into problems.

I noticed i couldnt do it. I'll try to save the front of the gripframe from milling.