 |
12-03-2012, 10:14 PM
|
#1
|
|
Join Date: Dec 2011
Location: Mound, MN
|
Invert mini has blowback. HELP!
I have been having blowback issues with my mini. I've spent about $50 trying to fix that darn thing.. Yet it still has blowback!
Here's what i have done:
1. Upgraded to v3 poppet
2. brand new solenoid
3. replaced all o-rings and lubed
4. reset the board
5. changed the dwell to see if that would work
6. broke in the spring
7. lubed the entire thing (making sure not to get lube in the poppet or poppet hole)
8. Changed the pressure on the regulator (lowered it in increments until i hit 150)
9. Checked over the stock bolt for damage (found none)
Anyone else have any ideas how to fix it???
|
|
|
|
12-04-2012, 08:38 AM
|
#2
|
|
Join Date: Aug 2012
Location: Mid-West
|
Try replacing the bolt rubber tip as well as the bolt o-rings. Also check to see if your check valve is installed correctly.
|
|
|
|
|
12-04-2012, 09:23 AM
|
#3
|
|
Join Date: Dec 2011
Location: Mound, MN
|
Quote:
Originally Posted by EmpireTech
Try replacing the bolt rubber tip as well as the bolt o-rings. Also check to see if your check valve is installed correctly.
|
I've replaced the bolt tip and the o-rings on it. Also the valve is installed like it should be. |
|
|
|
|
12-05-2012, 08:07 AM
|
#4
|
|
Join Date: Aug 2012
Location: Mid-West
|
Last thing to check is the check valve, make sure its there. If nothing else we can setup you up with an RMA and get it in here to us for repair.
|
|
|
|
|
12-05-2012, 08:21 AM
|
#5
|
|
Join Date: Dec 2011
Location: Mound, MN
|
Quote:
Originally Posted by EmpireTech
Last thing to check is the check valve, make sure its there. If nothing else we can setup you up with an RMA and get it in here to us for repair.
|
Okay i'll double check the valve. |
|
|
|
|
12-05-2012, 08:55 PM
|
#6
|
|
Join Date: Dec 2011
Location: Mound, MN
|
Well, checked over the valve and everything seems to be correct. Aired it up and put 2 balls in and when i shot, there was still blowback (ended up hitting my deck that was 15 feet up from where i was standing. Any other ideas?
|
|
|
|
|
12-05-2012, 10:58 PM
|
#7
|
|
CT Effect
Join Date: Sep 2010
Location: 203
|
It seems like you've covered all the bases, it might be time to send it in to be teched.
|
|
|
|
|
12-06-2012, 08:13 AM
|
#8
|
|
Join Date: Aug 2012
Location: Mid-West
|
Quote:
Originally Posted by Blak Katalyst
It seems like you've covered all the bases, it might be time to send it in to be teched.
|
This is most likely the best thing we can do. Please email us at tech@paintballsolutions.com with the following info;
Name,
Phone Number,
Shipping Address,
Requesting RMA for Mini.
If you can include in there that you are getting blow-by or blow-back. That why they can note it on the RMA. |
|
|
|
|
12-06-2012, 08:50 AM
|
#9
|
|
Fire and Forget.
Join Date: May 2011
Location: Pennsylvania
|
Could be a faulty gauge too, pressure might be well over what it's saying.
__________________
Dust Black Axe w/ white accent
14" Freak Kit
Spire with CrownSF
Crossfire 68/45 w/ Stealth
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
